PICK AND PLACE

Fully Automatic Solder Paste Printer YS-G5

Fully Automatic Solder Paste Printer YS-G5

One. Equipment body
1. Equipment model YS-G5
2. Equipment size 1140 (front length) * 1364 side depth) * 1404 (height) mm
3. Main power supply: AC: 220±10%, 50/60HZ 3KW stable power supply with rated current, plug type: inch. The electrical interface is as shown in the figure above:
4. Main air supply source: a stable industrial air source with a pressure of 4.0~6kgf/cm², the trachea diameter is 6mm/8mm/10mm/12mm, the front joint of the trachea is universal, and the rear joint only needs to match the size of the trachea
5. Machine weight: about 900Kg

Fully Automatic Solder Paste Printer With Electrostatic Protection 1
Two. Equipment use environment
1. Workshop temperature—20℃~+45℃
2. Workshop humidity 30-60%
3. Electrostatic protection: ESD grounding and electrostatic protection are required
4. If the equipment is not used on the first floor, please pay attention to the heavy load-bearing of the floor, and the load-bearing must be ≥650kg/m²

 

Machine Performance
Repeat Position Accuracy ±0.01mm
Print Accuracy ±0.025mm
NCP-CT 7.5s
HCP-CT 19s/pcs
Process CT 5min
Transfer line CT 3min
Substrate processing parameter
Max9∶27imum board size 400*340mm Scalable:530*340mm(Options)
Minimum board size 50*50mm
Board thickness 0.4-6mm
Camera Mechanical range 528*340mm
Maximum board weight 3kg
Board edge clearance 2.5mm
Board height 15mm
Transport speed 900±40mm
(Max)Transport speed Segment control 1500mm/s(Max)
Transport direction One-section transport rail
Transmission direction Left to right
Right to Left
In and out the same
Support System Magnetic Pin
Support Block
Manual Up-down table
Board clamp Automatic top clamping
Side clamping
Adsorption function
Printing Parameters
Print Speed 10~200mm/sec
Print Pressure 0.5~10Kg
Print Mode Single or double doctor blade printing
Queegee Type (09/s5/st alfue) apels apels ofoonbs/mand (09/ss/stalle) Chiell/Dievilievi
Snap-off 0~20mm
Snap-Speed 0~20mm/sec
The template frame size 470*370mm~737*737mm(Thickness∶20-40mm)
Steel mesh positioning method Automatic Y-direction positioning (compatible with manual compensation adjustment)
Cleaning Parameters
Cleaning System Dry, Wet Vacuum three modes
Cleaning system Up Drip type
Cleaning stroke Automatic generation
Cleaning position Post cleaning
Cleaning Speed 10-200mm/sec
Cleaning fluid consumption Auto & Manually adjustable
Cleaning paper consumption Auto & Manually adjustable
Vision Parameters
CCD FOV 10*8mm
Camera type 130 Thousand CCD Digital camera
Camera System Lock up/down optics structure
Camera Cycle time 300ms
Fiducial mark types Standard Fiducial Mark Shape
Round,square,diamond,cross
Pad and profile
Mark size 0.5-5mm
Mark number Max:4pcs
Stay away number Max: 1pcs
Smart equipment
safely control Door open to stop, abnormal alarm
2D inspection Detection of less tin/missing print/continuous tin
Automatic crimping Automatically push up the guide rail
Vacuum adsorption Platform vacuum adsorption
Machine parameter
Power Source AC:220±10%,50/60Hz2.2KW
Air Pressure 4~6Kgf/cm²
Air Consumption About 5L/min
Operating Temperature -20℃~+45℃
Working environment humidity 30%~60%
Machine dimension (without Tower light) 1404(H)mm
Machine Length 1140(L)mm
Machine Width 1364(W)mm
Machine Weight Approx Approx∶About900Kg
Equipment load bearing requirements 650Kg/㎡