LED SMT Sencil Printing Machine Fully Automatic Solder Paste Screen Printer Introduction of SMT Printer YUSH Full-Auto SMT Stencil Printer is a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automation, achieve zero defect. 1. High positional accuracy, repeated positioning accuracy ±0.01mm; printing accuracy 0.025mm 2. Support glue printing,Automatic control improves production efficiency, quality control and saves production cost 3. Automatic PCB calibration,Squeegee pressure adjustable,Automatic printing,Automatic stencil cleaning 4. Programmable motor controls separation speed and distance among squeegee, stencil and substrate, to realize multi-method separation. 5. Multi-functional PCB positioning system for convenient and accurate PCB positioning. 6. Programmable PCB lifting platform ensure the PCB to lift to a proper height. 7. Adopt company independently developed suspended print head with automatic pressure adjustment system. Specification of SMT Stencil Printer Model YSL-4034 YSL-5151 YSL-6561 YSL-1500(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 470*370 ~ 1800*750 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 80*50 ~ 1500*350 TransportDirection Left-Right; Right-Left; Left-Left; Right-Right Support System Magnetic Pin/Up-down table adjusted/support block Clamping System Side clamping, vacuum nozzle,Automation retractable Z pressure Printer Head Two independent motorised printhead Squeegee Type Stainless steel(standard),plastic Cleaning System Dry, Wet, Vacuum Inspection 2D Inspection(Standard) Power Supply AC:220±10%,50/60HZ,3Kw Control Method PC Control Dimension(mm) 1220*1355*1500 1220*1530*1500 1330*1530*1500 2500*1220*1500 Weight Approx:1250kg Approx:1300kg Approx:1300kg Approx:1800kg Model YSL-5134 YSL-6534 YSL-1200(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 Dimension(mm) 1220*1355*1500 1330*1530*1500 2200*1200*1500 Weight Approx:1250kg Approx:1300kg Approx:1500kg Customer Factory For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email：evaliu@hk-yush.com
MORE>
YSL-STAR | SMT PRINTER Above & Beyond Your Expectation The Fully Automatic SMT Printer YSL-STAR features machine vision technology for automatic identification, employing a high-precision servo drive dynamic system to ensure fast and accurate alignment. Computer control enables effortless adjustment of printing height, squeegee pressure, printing stroke, speed, cleaning cycle, and other printing parameters with just a simple click The YSL-STAR is equipped with features such as auto stencil positioning, automatic top clamp & motorized side clamp, and stencil lock. These capabilities help ensure superior printing quality with minimal human intervention. STANDARD FEATURES Back to Back Ready 2 machines back-to-back are perfect match for dual-lane SMT line. Therefore, the internal structure of the YSL-Star is pre-assembled in back-to-back configuration. It can be used as a stand-alone unit, or additional equipment can be seamlessly added in a back-to-back mode in future. Auto Stencil Positioning The stencil Y position is adjustable via user interface, and the settings can be saved and reapplied when replacing the stencil. This function significantly reduces human errors and saves time in readjusting stencil position. Stencil Lock The stencil lock vacuum suction firmly holds the stencil on both sides of the conveyor during printing cycle, eliminating stencil vibration by having firm contact with the PCB. PCB Clamper The PCB clamper is a combination of retractable top clamp and motor controlled side clamp, uniquely designed by YUSH (patented). With these standard features, all of today’s available and challenging substrates can be securely clamped and print to the highest quality. OPTIONAL FEATURES Ready for Industry 4.0 Through machine status, parameters can be uploaded automatically. Designed to support customers’ advancement towards Industry 4.0 intelligence production, YSL-Star provides seamless connection with users’ MES system, enhancing product traceability and maintenance needs. Paste Rolling Diameter Monitoring System Tracing solder paste rolling diameter in real time and trigger the auto dispensing if it falls below 10mm. Completely eliminate insufficient solder paste on stencil and keep the paste rolling speed within optimum range to achieve best printing result with this smt printer. Auto Paste Dispensing The paste is automatically dispensed across the entire squeegee length, maintaining at 15mm rolling diameter, adopting the common 500 grams’ solder paste jar. Completely eliminates the wastage of solder paste overflowing to the sides of squeegee. Stencil Aperture Inspection System Using panel light installed at the top and CCD camera below to inspect stencil apertures. It automatically detects the clogging of stencil apertures to eliminate poor quality stencil being used, ensure quality printing right from the start. PERFORMANCE Machine Alignment Capability 2 Cmk @ ± 12.5 microns 6 sigma Process Alignment Capability 2 Cpk @ ± 20 microns 6 sigma Core Cycle Time (excluding printing & cleaning time) < 8.5 secs Product Changeover Time < 3 mins New Product Set-up Time < 10 mins BOARD HANDLING Max. Size (L x W) 510 mm x 510 mm Min. Size (L x W) 50 mm x 50 mm Thickness 0.4~6 mm PCB Thickness Adjustment Automatic PCB Max. Weight 5 kg PCB Edge Clearance 3 mm PCB Bottom Clearance 23 mm PCB Warpage Max. 1% diagonally Clamping Method Auto retractable top clamp, motor controlled side clamp Support Method Magnetic support pins, bars, blocks, vacuum suction Conveyor Direction L to R, R to L, R to R, L to L (software control) Conveyor Height 900 ± 40 mm Conveyor Speed 1,500 mm/s Conveyor Width Adjustment Automatic PRINTING PARAMETERS Stencil Frame Size (L x W) Adjustable, 470 mm x 370 mm to 737 mm x 737 mm Print Gap (snap-off) 0~20 mm Printing Table Adjustment Range X: ±10 mm, Y: ±10 mm : Θ ±2° Print Speed 10~200 mm/s Squeegee Pressure 0.5~10kg (program control) Squeegee Type Std.: Metal Squeegee 280 mm, 350 mm & 520mm. Opt.: Rubber Squeegee Angle Std. 60°, Opt. 45°, 50°, 55° Cleaning System Auto wet, dry, vacuum (Software select) FACILITIES REQUIREMENT Power Supply AC220V ± 10% 50/60Hz Power Consumption 3kW Air Supply 4 ~ 6Kgf/cm² Air Consumption 5L/min Dimension (excluding signal tower) 1,240mm (L) x 1,410mm (W) x 1,500mm (H) Machine Weight 1,200kg OPERATOR INTERFACE Hardware LCD Monitor, Mouse & Keyboard Operating System (OS) Windows 10 Control Method Industrial PC controlled I/O Interface SMEMA Standard PRODUCT DIMENSION
MORE>
High Flexibility Solder Paste SMT Stencil Printer Introduce of SMT Stencil Printer YSL providing LED printing machine, solder paste printer, SMT Stencil Printer, PCB Printing Machine, for SMT LED production line. YSL Full-auto SMT Stencil Printer is a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automation, achieve zero defect. 1.High positional accuracy, repeated positioning accuracy ±0.01mm; printing accuracy 0.025mm 2.Support glue printing,Automatic control improves production efficiency, quality control and saves production cost 3.Automatic PCB calibration,Squeegee pressure adjustable,Automatic printing,Automatic stencil cleaning 4.Programmable motor controls separation speed and distance among squeegee, stencil and substrate, to realize multi-method separation. 5,Multi-functional PCB positioning system for convenient and accurate PCB positioning. 6.Programmable PCB lifting platform ensure the PCB to lift to a proper height Specification of SMT Stencil Printer Model YSL-4034 YSL-5151 YSL-6561 YSL-1500(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 470*370 ~ 1800*750 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 80*50 ~ 1500*350 TransportDirection Left-Right; Right-Left; Left-Left; Right-Right Support System Magnetic Pin/Up-down table adjusted/support block Clamping System Side clamping, vacuum nozzle,Automation retractable Z pressure Printer Head Two independent motorised printhead Squeegee Type Stainless steel(standard),plastic Cleaning System Dry, Wet, Vacuum Inspection 2D Inspection(Standard) Power Supply AC:220±10%,50/60HZ,3Kw Control Method PC Control Dimension(mm) 1220*1355*1500 1220*1530*1500 1330*1530*1500 2500*1220*1500 Weight Approx:1250kg Approx:1300kg Approx:1300kg Approx:1800kg Model YSL-5134 YSL-6534 YSL-1200(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 Dimension(mm) 1220*1355*1500 1330*1530*1500 2200*1200*1500 Weight Approx:1250kg Approx:1300kg Approx:1500kg SMT production line LED TV production line For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email：evaliu@hk-yush.com
MORE>
Professional Solder Paste SMT Stencil Printer Introduction of SMT Printer YSL-4034 is a high precision automatic solder paste printer, correspond to industrial 4.0 and MES system.through a higher level of automation, achieve zero defect. 1. High positional accuracy, repeated positioning accuracy ±0.01mm; printing accuracy 0.025mm 2. Support glue printing,Automatic control improves production efficiency, quality control and saves production cost 3. Automatic PCB calibration,Squeegee pressure adjustable,Automatic printing,Automatic stencil cleaning 4. Programmable motor controls separation speed and distance among squeegee, stencil and substrate, to realize multi-method separation. 5,Multi-functional PCB positioning system for convenient and accurate PCB positioning. 6.Programmable PCB lifting platform ensure the PCB to lift to a proper height 7. Adopt company independently developed suspended print head with automatic pressure adjustment system. Specification of SMT Stencil Printer Model YSL-4034 YSL-5151 YSL-6561 YSL-1500(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 470*370 ~ 1800*750 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 80*50 ~ 1500*350 TransportDirection Left-Right; Right-Left; Left-Left; Right-Right Support System Magnetic Pin/Up-down table adjusted/support block Clamping System Side clamping, vacuum nozzle,Automation retractable Z pressure Printer Head Two independent motorised printhead Squeegee Type Stainless steel(standard),plastic Cleaning System Dry, Wet, Vacuum Inspection 2D Inspection(Standard) Power Supply AC:220±10%,50/60HZ,3Kw Control Method PC Control Dimension(mm) 1220*1355*1500 1220*1530*1500 1330*1530*1500 2500*1220*1500 Weight Approx:1250kg Approx:1300kg Approx:1300kg Approx:1800kg Model YSL-5134 YSL-6534 YSL-1200(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 Dimension(mm) 1220*1355*1500 1330*1530*1500 2200*1200*1500 Weight Approx:1250kg Approx:1300kg Approx:1500kg Specification of SMT Stencil Printer Model YSL-4034 YSL-5151 YSL-6561 YSL-1500(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 470*370 ~ 1800*750 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 80*50 ~ 1500*350 TransportDirection Left-Right; Right-Left; Left-Left; Right-Right Support System Magnetic Pin/Up-down table adjusted/support block Clamping System Side clamping, vacuum nozzle,Automation retractable Z pressure Printer Head Two independent motorised printhead Squeegee Type Stainless steel(standard),plastic Cleaning System Dry, Wet, Vacuum Inspection 2D Inspection(Standard) Power Supply AC:220±10%,50/60HZ,3Kw Control Method PC Control Dimension(mm) 1220*1355*1500 1220*1530*1500 1330*1530*1500 2500*1220*1500 Weight Approx:1250kg Approx:1300kg Approx:1300kg Approx:1800kg Model YSL-5134 YSL-6534 YSL-1200(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 Dimension(mm) 1220*1355*1500 1330*1530*1500 2200*1200*1500 Weight Approx:1250kg Approx:1300kg Approx:1500kg Customers Factory SMT production line LED TV production line Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email：evaliu@hk-yush.com
MORE>
Key advantages It can achieve rapid switching of multiple processes and function heads depending on the modular equipment platform High stability and the 6th order natural frequency of the rack ensure good stability MES and data acquisition ports are reserved for Interconnection of Everything and i4.0 data connection to achieve intelligent manufacturing and intelligent decision-making Long-term target: It aims to provide overall FMS solutions to EMS and automotive electronics customers System architecture The modular design is used, with flexible architecture and focus separation to facilitate free combination between modules. The maximized design for reuse meets more personalized requirements with the least modules and components. MES function It has integrated and encapsulated common MES communication modes: database, file, TCP transmission, KepServer, WebService, WebApi, etc. Network functions It is connected to the intelligent gateway through Ethernet, and the intelligent gateway is parsed and transmitted to the server. Through the GKG data platform system deployed in the server, the equipment is monitored in a real time to achieve: fault reporting, remote diagnosis, remote data query and export, remote control and upgrading.
MORE>
Equipment name: FMS (Flexible Manufacturing Systems) Equipment model: YSL-GA1000 Product overview: n The automatic flexible manufacturing platform achieves rapid switching of various production processes (assembly, labeling and code scanning, dispensing, screwing, special-shaped plug-in, soldering, laser marking and AVI) through modularization; different size platforms can be customized according to customers’ products n Rack modules can be compatible with XY modules and manipulators in several brands (such as ABB, FANUC, Yaskawa, Epson, etc.) n The overall modular design is used to achieve rapid installation, rapid maintenance and replacement. The bus PCB signal interface is reserved on the platform, which can meet the layout requirements for changing the wiring of various function heads. Product characteristics： High availability: applicable to automotive electronics, new energy, 3C electronics, medical products and other manufacturing applications High accuracy: Repeated positioning accuracy at ±0.02mm, and product manufacturing accuracy at ±0.035mm High compatibility: Customers are enabled to upgrade their products without changing their equipment, which helps greatly reduce the cost of equipment High stability: By CAE simulation analysis, the 6th order natural frequency of the rack can ensure good stability and durability High ductility: reserved MES and data acquisition ports to achieve intelligent manufacturing and intelligent decision-making for the Internet of Everything (IOE) and i4.0 data docking. Technical information： Equipment size: 1000*1300*1800mm Equipment weight: 800Kg Product manufacturing size: 50*50~350*460mm Maximum radius of manipulator: 700mm Product manufacturing weight: maximum load of the track at 12kg, and the maximum load of the function head at 7kg Input voltage: AC220V 50/60Hz Input air pressure: 0.4~0.7Mpa Maximum rated power: 2.5KW Operating ambient temperature: 0~45℃ Equipment manufacturing accuracy: ±0.05mm Pixel accuracy: 0.005mm/pixel Barcode recognition capability: Level C or above Motion control system: panel card control
MORE>
YSL-k870 meets 870*610mm printing process requirements 1.Image and optical system Using uniform ring light and high brightness coaxial light,with promise brightness adjustment function,then all types of Mark points can be well recognized (Including the rugged Mark points),applicable for tin plating,coppering,gold plating,tin spraying,FPC and other types PCB with of different colors.With YUSH patent mathematical model,able to ensure high accuracy. 2.Cleaning system YUSH cleaning system equipped with three cleaning methods: dry cleaning, wet cleaning. vacuum.which can be combined to use.It can also be cleaned by manual if customer do not need to use automatic cleaning to reduce the cleaning time and improve production efficiency. The newly wiping system ensures full contact with the stencil, increased vacuum suction can effectively eliminate the remaining paste in the mesh,which can achieve effective automatic cleaning function. CCD part and cleaning system is separated, when CCD working. CCD part independently move to reduce the servo motor load and improve the machine speed and accuracy. 3.Adjustable Stepping Motor-Programmable &Floating Print-Heads 4.Chinese/English Operating Interface The machine adopts windows XP/win7 operating interface with YUSH user friendly software.Chinese/English selectable,Menu/Operating Journal/Breakdown Record/Breakdown Diagnosis/Error Analysis/Light Alarm etc 5.YUSH special adjustment jacking platform. Stable and easy to adjust,it can quickly adjust the pin jacking height of PCB with different thickness. 6.2D Solder Paste Print Quality Inspection and Analysis System The 2D system immediately detects solder paste deposition defects such as deviation, lack paste,miss paste,paste joint etc,and guarantees print quality. Specifications Machine Performance Repeat Position Accuracy ±0.01mm Print Accuracy ±0.025mm NCP-CT (excluding cleaning and printing) <10.5 sec HCP-CT (including cleaning and printing) 25s/pcs Process CT 6min Transversal CT 4min Substrate processing parameter Maximum board size 870*610mm Minimum board size 100*65mm Board thickness 0.4~8mm Camera Mechanical range 870*610mm Maximum board weight 10kg Board edge clearance 3.5mm Board height 23mm beyond the special top pin Transport speed 900+40mm (Max)Transport speed Segment control,1500mm/s(Max) Transport direction One stage transport rail Transmission direction Left to right Right to Left In and out the same Support System Magnetic Pin (65mm)Support Block (65mm)Patented over the top clamping Board clamp Automatic to clamping Side clamping Adsorption function Printing Parameters Print Speed 10~150mm/sec Print Pressure 0.5~30Kg Print Mode Single or double scraper printing Queegee Type Rubber/Squeegee Blade (angle45/55/60) Snap-off 0~20mm Snap-Speed 0~20mm/sec The template frame size 650*550mm~1100*950mm Steel mesh positioning mode Automatic Y orientation (compatible with manual compensation adjustment) Cleaning Parameters Cleaning System Dry，Wet Vacuum three modes High speed cleaning weave cleaning Cleaning system Top drip Cleaning stroke Automatic generation Cleaning position Post cleaning Cleaning Speed 10-200mm/sec Cleaning fluid consumption Auto&Manually adjustable Cleaning paper consumption Auto&Manually adjustable Vision Parameters CCD FOV 10*8mm Camera type 130 Thousand CCD Digital camera Camera System Lock up/down optics structure Camera Cycle time 200 ms Fiducial mark types Standard Fiducial Mark Shape round、square、diamond、cross Pad and profile Mark size 0.1-6mm Mark number Max: 4pCs Stay away number Max: 1pcs Machine parameter Power Source AC:220±10%，50/60Hz 3KW Air Pressure 4~6Kgf/cm2 Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension(without Tower light) 1530(H)mm Machine Length 1590(L) mm Machine Width 1608(W)mm Machine Weight Approx Approx:1500Kg Equipment load bearing requirements 650Kg/㎡ The information contained in this manual contains general descriptions and performance characteristics that may be inconsistent with the product described.or may change with the development of technology.Specific performance characteristics and functions are binding only when an agreement is reached. Dimensional appearance
MORE>
The future comes from today's choices Functions and Features 1.Overall perception YUSH with excellent information acquisition capabilities can use temperature and humidity detection &camera scan code functions. allowing you to have absolute control over various information such as the production process environment and product materials. 2.Intelligent processing As for the necessary equipment parameter debugging during the production process,YUSH provides you with the online function of SPI according to the monitoring status of the equipment so that the equipment engineers can "free their hands" and realize the intelligent control of material replacement and printing quality. 3.Ultimate experience The brand-new advanced UI software interface redefines the convenience and intelligence of software operations allowing you to get an efficient and reasonable experience in the experience of manufacturing process and line change.When the equipment enters the production state, the advanced Ul integrates all necessary The information,open to the output interface, allows you to see the SOP information of the equipment at a glance only by visually reading the status, and the easy-to-understand and easy to-operate Chinese and English system is equipped with a global service system, so that the equipment is easy to use. Without boundaries. 4.Capacity output The greater the output of high-quality production capacity, the higher the profit a company can obtain.With this as a quide,with the capability of interconnection of everything-private customization YUSH-BTB infinite compatibility: two into one and one into two Flexible application.at the same time,the YUSH-HTH mode formed by the software expansion of the single-to-single mode can help customers use this mode to achieve the demand for increasing production capacity when the online body space is insufficient.On the other hand,It is like the V8 with the"track mode" turned on, and with BTB&HTH there is no pressure for you in the high-efficiency and high-quality delivery. 5.Traceability System The newly upgraded optical system not only maintains good mark recognition ability, but also perfectly adapts to the traceability requirements required by the current intelligent line,maximizing the utilization rate of the equipment, and allowing you to get the best experience with the minimum investment. 6.Private order According to your needs，the standard version of Industry4.0 with a"private customized" experience can enable you to obtain the ultimate experience for equipment process parameters personnel debugging information, material monitoring and information capture，and truly realize the output link The ability of real-time control and full traceability of produced data will spare no effort for you to realizethe needsofindustrialintelligence. Specifications Machine Performance Repeat Position Accuracy +12.5um@6σCPK≥2.0 Print Accuracy +22um@6σCPK≥2.0 NCP-CT(excluding cleaning and printing) 7s HCP-CT(including cleaning and printing) 18s/pcs Process CT 4min Transversal CT 2min Substrate processing parameter Maximum board size 400*340mmExpandable :530*340mm(option) Minimum board size 50*50mm Board thickness 0.4~6mm Camera Mechanical range 528*340mm Maximum board weight 4kg board edge clearance 2.5mm Board height 15mm Over top pin Transport speed 900±40mm (Max) Transport speed Segmented control，1500mm/s(Max) Transport direction One stage transport rail Transmission direction Left to right Right to Left In and out the same Support System Magnetic Pin Support Block Manual Up-down table Board clamp Manual the top clamping Side clamping Printing Parameters Print Speed 10~200mm/sec Print Pressure 0.5~10Kg Print Mode Single or double scraper printing Queegee Type Rubber/Squeegee Blade(angle45/55/60) Snap-off 0~20mm Snap-Speed 0~20mm/sec The template frame size 470*370mm~737*737mm(Thickness:20-40mm) Positioning mode of steel mesh Automatic Y-direction positioning Cleaning Parameters Cleaning System Dry，Wet Vacuum three modes High speed cleaning Integrated & weave cleaning Cleaning system Side spray type Cleaning stroke Automatic generation Cleaning position Post cleaning Cleaning Speed 10-200mm/sec Cleaning fluid consumption Auto & Manually adjustable Cleaning paper consumption Auto & Manually adjustable Vision Parameters CCD FOV 10*8mm Camera type 130 Thousand CCD Digital camera Camera System Lock up/down optics structure Camera Cycle time 150ms Fiducial marktypes Standard Fiducial Mark Shape round、square、diamond、cross Pad and profile Mark size 0.3-6mm Mark number Max: 4pCS Stay away number Max: 1pcs Machine parameter Power Source AC:220+10%,50/60Hz 2.2KW Air Pressure 4~6Kgf/cm2 Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension(without Tower light) 1460mm Machine Length X direction 1150mm Machine Width Y direction 1380mm Machine Weight Approx Approx:900Kg Equipment load bearing requirements 650Kg/㎡ The information contained in this manual contains general descriptions and performance characteristics that may be inconsistent or may change with the development of technology.Specific performance characteristics and functions are binding only when an agreement is reached Dimensional appearance
MORE>
Fully Automatic Solder Paste Printer In the fields of high-precision printing,high-quality pursuit,and high-efficiency production equipment capabilities determine the stability of printing quality and output efficiency and GT mini is your best choice. In the new printing scheme of GTmini,with the unique dual-track module,you can obtain high-efficiency UPH output, and the flexible matching scheme can also be corverted from HTH mode to single-track mode at any time,allowing you to have a return on investment Full of confidence. At the same time, GTmini is one,so you don't have to worry about the footprint of printing equipment,because GTmini has a 2:1 ratio of equipment wiring advantages in the unit footprint of traditional printing equipment,which is a real unit footprint. Program implementers with higher area output. The GTmini, which has high-demand assembly technology can also allow you to experience better human-computer interaction the "self-awareness function' with excellent capabilities and the "self-spot"that exceeds the industry's ability when ensuring the accuracy of the first-tier equipment"Check function,let GTmini debut in the traditional equipment is the pinnacle. At the same time, GTmini's dosed-loop system such as:solder paste residual detection & automatic tin addition real-time pressure closed-loop, steel mesh adsorption and other functions, not only consolidate printing stability, but also reduce manual operations for you and improve efficiency And reduce costs. On the basis of focusing on equipment capabilities GKG is more"customer centric"With the support of YUSH process team experts, you can experience private customized service plans,including:installation,commissioning,training.maintenance, etc. and will also focus on Your pain point,provide you with the whole line of operation, product process technology and other programs. Choose GTmini, you immediately have the world's top printing solutions and service solutions team,to escort your EMS journey,win-win future. High-precision Printing / High-quality Pursuit / High-efficiency Production GT mini insists on being market-oriented, keeping the wind that leads the design front, and developing the HTH model vertically.The two-in-one GTmini covers an area of only: 1500mmx1500mmx1240mm,and the same-side layout design allows you to be on the production line. Get a good experience in layout and operation convenience. Vertically / HTH Model / Two-In-One Equipment Modules 1.Transmission The dual-track mode of GTmini allows you to worry about the site and is also excellent in product handling,because 2/3/4-track can be arbitrarily translated and adjusted. Not only is the setting simple, but also the accuracy is very reliable. 2.Monitoring The 1.3 million pixel,FOV:10*8m digital camera standard on GTmini can not only read Barcode through the CSF system, but also obtain accurate coordinate values within the interval of milliseconds. At the same time,GTmini's monitoring system can also monitor the parallelism of the track transmission module in real time and after equipment maintenance,GTmini's unique "self-inspection function''can perform inspection on all modules of the equipment,reducing and reducing man-made for you Error factors for maintenance and calibration. 3.Platform The GTmini platform is based on a very stable frame design.With super torsional stiffness and vibration resistance, as well as the precision drive modules and high-precision transmission modules it equips, it lays the foundation for the continuous use of equipment. At the same time, the unique "position detection" function can ensure the real-time consistency of the lifting position of the equipment every time, so that your quality printing is fully guaranteed,and details are controlled and considered for you from the root cause. 4.Scraper GTmini's scraper module adopts the basic settings of pneumatic + screw direct transmission,re-optimizes the calibration capability,adjusts the pressure fluctuation to CTcompression to40ms and the pressure accuracy is guaranteed to be+0.2kg,realizing real-time calibration and ensuring Constant pressure and data upload function lay a solid foundation for quality printing. 5.Cleaning The YUSH process expert team knows that the cleaning of the steel mesh hole wall is crucial to the printing quality, so GTmini has spared no effort in setting the steel mesh cleaning link. Based on the brand-new and optimized Saigang rubber strip the unigue "Hurricane Eye''cleaning system maintains 99.6% of the residual tin powder in the hole wall under the consistent multiple cleaning modes. It is equipped with integrated cleaning (dry Wipe, wet wipe, vacuum),can achieve a quick and thorough cleaning effect. And based on the convenience of customers, the thoroughly pre-installed cleaning structure is equipped with an explosion-proof and corrosion-resistant alcohol pot weighing structure. Under the premise of maintenance, it can also realize the detection and warning of the amount of deaning paper and cleaning liquid,so as to achieve Cleaning paper control and data analysis. Under the above novel and attentive function settings,GTmini's unique quick-change structure, after your cleaning paper is exhausted can complete the paper replacement within 8 seconds, leaving you more time for quality output. 6.Software GTmini's scraper module adopts the basic settings of pneumatic + screw direct transmission,re-optimizes the calibration capability,adjusts the pressure fluctuation to CT compression to 40ms, and the pressure accuracy is guaranteed to be±0.2kg，realizing real-time calibration and ensuring Constant pressure and data upload function lay a solid foundation for quality printing. Dimensional Appearance
MORE>
Fully Automatic Vision Screen Printer 1.lmage and optical system Using uniform ring light and high brightness coaxial light,with promise brightness adjustment function,then all types of Mark points can be well recognized (Including the rugged Mark points),applicable for tin plating,coppering,gold plating,tin spraying,FPC and other types PCB with of different colors.With GKG patent mathematical model,able to ensure high accuracy. 2.Cleaning system GKG cleaning system equipped with three cleaning methods:dry cleaning, wet cleaning,vacuum.which can be combined to use.It can also be cleaned by manual if customer do not need to use automatic cleaning to reduce the cleaning time and improve production efficiency. The newly wiping system ensures full contact with the stencil, increased vacuum suction can effectively eliminate the remaining paste in the mesh,which can achieve effective automatic cleaning function.CCD part and cleaning system is separated,when CCD working,CCD part independently move to reduce the servo motor load and improve the machine speed and accuracy. 3.GKG special adjustment jacking platform. Stable and easy to adjust,it can quickly adjust the pin jacking height of PCB with different thickness. 4.High adaptability steel mesh frame clamping system Able to print all kinds of size screen frames，and quickly change models during production line. 5.Adjustable Stepping Motor-Programmable&Floating Print-Heads 6.Chinese/English Operating Interface The machine adopts Windows operating interface with GKG user friendly software.Chinese/English selectable, Menu/Operating Journal/Breakdown Record/Breakdown Diagnosis/Error Analysis/Light Alarm etc. 7.2D Solder Paste Print Quality Inspection and Analysis System The 2D system immediately detects solder paste deposition defects such as deviation，lack paste, miss paste,paste joint etc, and guarantees print quality. The information contained in this manual contains general descriptions and performance characteristics that may be inconsistent with the product described. or may change with the development of technoloay.Specific performance characteristics and functions are binding only when an agreement is reached. Dimensional appearance
MORE>
0.4mm~6mm High Accuracy Full Automatic SMT Stencil Printer/ PCB Screen Printing Machine Specs: PCB parameters Max board size 450mm x 350mm Min board size 50mm x 50mm PCB thickness 0.4mm~6mm Warpage Max. PCB diagonal 1% Max board weight 6Kg Board edge spacing configuration to 3mm Max bottom spacing 20mm Transmission speed 1500mm/s(Max) Transmission height to the land 900±40mm Transmission direction Left-Right, Right-Left, Left-Left, Right-Right Transmission method One-stage transmission rail PCB pick-up method Software can change the elastic lateral pressure(Optional: multipoint on the bottom or partial vacuum or whole vacuum). Board supporting method Magnetic thimble, contour blocks, special workpiece fixture Printing parameters Printing head Two independent straight league motor drives Template frame size 370mm x 470mm(470 left/right placed)~737 mm x 737 mm Max printing area 450mm x 350mm Scraper type Stencil scraper/rubber scraper(angle 45°/55°/60° select according to the printing technology) Printing mode Single or two scrapers printing Demoulding length 0.02 mm to 12 mm Printing speed 6 mm/s to 200 mm/s Printing pressure 0.5kg to 10Kg Printing movement ±250 mm (from the center) Image parameters Field of view(FOV) 6.4mm x 4.8mm Table adjustable area X,Y:±7.0mm θ:±2.0° Reference point type Standard reference point(see SMEMA standard),bonding pad/hole Camera system Individual camera, Up/down individual imaging visual system, geometric matching positioning Performance parameters Imaging alignment repeated accuracy ±12.5μ(±0.0005") @6 σ,Cpk≥2.0 Printing repeated accuracy ±25μ(±0.001") @6 σ,Cpk ≥ 2.0 Cycle time Less than 7.5s Replace line time Less than 5mins Equipment Power AC220V±10%,50/60HZ,15A Compressed air 4~6Kg/cm2, 10.0 tube Operation system Windows XP Equipment size 1140mm(L) x 1400mm(W) x 1480mm(H)( Do not include the screen and tri-color light height) Equipment weight About 1000kg Highly stable CCD camera system The four-channel light source is adjustable, the intensity of the light source is adjustable, the illumination is uniform, and the collected images are more perfect, which can be well identified (including uneven Mark points), suitable for tin plating, copper plating, gold plating, tin spraying, FPC, and other types of PCBs in different colors. High efficiency stencil cleaning system The new type of wiping system ensures full contact with the steel mesh, and the enlarged vacuum suction force ensures that the residual solder paste in the mesh is eliminated vigorously, and the effective automatic cleaning function is truly realized. Simple and reliable PCB positioning system Adaptive PCB thickness, software adjustable elastic side pressure and magnetic support device. Smart scraper system Intelligent programmable settings, independent, direct-connected motor-driven scraper, built-in precise pressure control system.
MORE>
Semi-auto solder paste printer YS-SP400 Feature: 1.Using precision guide rail and the import motor to drive the blade seat conversion, printing, and high accuracy. 2.Printing scraper can rotate 45 degrees fixed up, easy printing stencil and squeegee cleaning and replacement. 3.Block can be adjusted before and after the blade, to choose the right printing position. 4.Combined with a fixed groove printing platen and PIN, easy installation and adjustment, for single, double sided printing. 5.School Edition way to move a steel mesh, combined with printed (PCB), X, Y, Z. Convenient fine adjustment. 6.Can be set to one-way and two-way, a variety of printing methods. 7.With the automatic counting function to facilitate the production of output statistics. 8.Adjustable blade angle, steel blade, rubber scraper are suitable. 9.Touch screen with a screen saver function, the time can be adjusted to protect the touch-screen life. 10.Printing speed display, can be adjusted.
MORE>
