Specification of JUKI SMT Line Machine
| Item/Model |
YSFX-3RAL |
YSFX-3RAXL |
||
|
Board size |
L size(410x360mm) |
YES |
NO |
|
|
L-Wide size(510x360mm)*1 |
YES | NO | ||
|
XL size(610×560mm) |
NO | YES | ||
|
Applicability to long PWB*1 |
800×360mm |
800×560mm |
||
|
Component height |
6mm |
YES |
||
|
Component size |
Laser recognition |
0402(01005) ~ 33.5mm×33.5mm |
||
|
Placement speed (chip) |
Optimum |
0.040Sec. / chip(90,000CPH)*2 |
||
|
|
IPC9850 |
66,000CPH*2 |
||
|
Placement accuracy |
Laser recognition |
±0.05mm(±3σ) |
||
|
Feeder inputs |
Max.240 in case of 8mm tape (on a Electric double tape feeder) |
|||
*2 This speed does not apply to XL board size.
Customers Factory
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT
SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine.
SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine.
YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry.
Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China.
Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information:
Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email：evaliu@hk-yush.com
The machine is warranted for 2 years and is warranted for one year from purchase and lifetime service support as well as long-term factory price. Yushun Electronics will provide online Q/A and troubleshooting support as well as technical consulting services.
MORE>
▲ (1) Introduction of online automatic locking screw machine The online automatic locking screw machine is generally used in conjunction with the assembly line to achieve unmanned operation. Through the cooperation with the assembly line, the inflow and outflow of the product, the online automatic locking screw machine can realize the work of sending screws, locking screws, detecting and rejecting defective products. Achieve true unmanned operation. Online automatic locking screw machine ▲ (two) online automatic lock screw machine advantages 1. Strong versatility. It is small in size and can be used in conjunction with production lines to replace products. 2. High efficiency. Several electric batches work at the same time, which can replace many workers; for example, four electric batch table type automatic locking screw machines are installed, and four screws are locked and locked at one time. The machine can lock several products at the same time. The number of Z-axis electric batches can be customized according to customer requirements. 3. The Y-axis can be made into double-station (ie double-Y-axis) as needed, and the operator can alternately load and unload. 4. Reduce the labor intensity of workers. Traditional manual placement of screws and alignment of the screw heads requires a lot of work time and effort. 5. High degree of automation. The operation is simple, and the staff speeds up the operation and debugging. A worker can manage several machines at the same time. Save labor. 6. Torque is accurate. Easy to adjust and ensure the quality of the lock. 7. The blown screw is delivered directly to the batch nozzle compared to the aspirating type. It saves time for screwing back and forth and is more efficient. more stable. ▲ (4) On-line automatic locking screw machine performance and parameters Machine construction Machine gross weight: about 100KG Dimensions: height 730* length 783* width 693 (according to customer product size) Power: AC 220V 50HZ Power: 300W Ambient temperature: -20~40 degrees Rack: steel table top, aluminum frame Control Description Human Machine Interface Touch Screen Program input direct coordinate teaching input Host program control Omron PLC Communication Serial port RS232C, computer communication software Speed and accuracy Positioning accuracy X, Y: +/- 0.02mm Z: +/-0.02mm Operating speed 500mm/sec (X-Y) Screw machine, automatic nail feeder, can be placed on the workbench. Number of automatic nail feeders According to the number of lock screws, one machine can send 2 screws Screwdriver Kelly Speed Electric Batch Kelly Speed Electric Batch (torque according to customer product configuration) The number of Z-axis electric batches is 1-4. Scope of application XY lock payment range: customized according to customer's products. Z-axis lock payment range: customized according to customer's products. Test item: Screw slip detection Screw leak lock detection Screw leak detection Handling defective products Alarm light and buzzer prompt ▲ (5) online automatic lock screw machine composition and design instructions (1) Structural composition: It mainly consists of automatic screw conveying system, X-Y-Z moving platform, lock screw mechanism and electrical control system. (2) Replacement of the product: The fixture can be directly replaced, and the corresponding program can be transferred to produce. (3) The time to lock a screw is about 1.2s. (Depending on the length of the screw, there is a slight difference). (4) The locking screw is: the supplied model automatic screw, which allows the incoming material dimensional tolerance to be ±0.2mm. (5) The lock-up product is: according to the product sample provided by the customer. (6) Fixture: According to the product design, accurate positioning and easy replacement are required. (7) The product must not be damaged during use (such as product deformation, scratches, appearance damage, etc.). (8) Reliability and stability: Under the premise of qualified product quality, the equipment can work continuously and stably every day, with low failure rate and adapt to the needs of large-scale production; ▲ (6) online automatic locking screw machine compared with traditional electric batch The machine automatically locks the screw according to the set coordinates Efficiency 1.2 seconds lock 1 time, 1 lock 2 screws 2 seconds lock 1 efficient Can reduce employees 1 person homework can save 2-3 people with multi-person work Labor intensity Automatic alignment of the machine Need to take the screw, move it, put it on the screwdriver head, and then align the hole lock screw. ▲ (seven) the advantages of online automatic lock screw machine It adopts ball screw + linear guide transmission with high precision and stable operation for a long time. Using servo drive There is no stepping motor stepping out and the running speed is higher. PLC control The specially developed lock screw control system is user-friendly. Contour point input is convenient for intelligent input, and coordinate point input is very simple. After-sales protection All offices are established by the manufacturer and are not distributed by local agents. So more focused, more professional, and more timely.
MORE>
Product Description 8 Heads SMT Pick and Place Machine With Guide Screw and Servo Motor 1.Details 2.Technical Parameter Specification Number of feeders 80 Number of IC tray 8 Number of cameras 10 Number of heads 8 Average power 1000W Automatic board Three-stage track Guide Screw guide Maximum mounting speed 15000 Pcs/h Average mounting speed of actual mounting resistance 12000 Pcs/h Maximum travel scope in Z axis 20mm Maximum circuit board area 500×455mm Positioning precision 0.01mm The buffer range of suction nozzle 4.5mm Weight 600KG Dimension 1420*1370*1350mm Power supply 110V/220V, 50/60Hz Compressed air 0.5-0.6Mpa Drive motor Panasonic servo motor Motion drive system Panasonic high-speed DSP drive Recognition mode Simultaneous recognition of eight heads Vacuum source of suction nozzle High-speed on-off vacuum generator with vacuum breaker Operating system Full-automatic chip mounter operating system operating system. Independently developed by us based on Windows operating system Supports windows xp, win7 Element angle 0-360°synchronous rotation during movement X/Y operation mode Intelligent curve of the linear acceleration and deceleration linkage MARK point positioning Full-automatic (the MARK point can be adjust at will) Intelligent alarm Automatic correction, automatic filling, feeding shortage alarm Plate entering mode Automatic connection from left to right in single sections Automatic PCB transfer positioning/plunger positioning, manual plate feeding Visual display 17-inch industrial control display, 4:3, resolution: 1280 x1024 Number of recognition cameras One Mark recognition camera, four quick-recognition cameras One precise-recognition camera. Adaptive mounting scope Adaptive to 0201 0402, 0603, 0805, 1206, diode, audion, SOT, QFP Within 40*40mm and the pin distance ≥0.3mm (0.5mm center distance) and BGA. 3. 8 Placement Heads 4.Screw 5.10 Cameras+Conveyor 6.Three section track 7.Application area
MORE>
Product specifications: Maximum board area: 400 * 200 mm Number of mounting heads: 4 Maximum movement range of the Z axis: 20 mm Maximum installation rate: 9,500 PCS / hour Average installation rate: 8,000 PCS / hour Positioning accuracy: 0.01 mm Nozzle buffer range: 4.5 mm Power supply: 220V / 110V, 50Hz Compressed air: 0.6-0.7 Mpa Average power: 400 watts Recognition mode: four-head synchronous recognition Number of cameras: one Mark camera, four high speed cameras, one HD camera Product weight: 210KG PCB access mode: automatic left and right access, support left and right device connection function Number of trays: Supports up to 48 non-feeder feed assemblies, each of which can be assigned its coordinates within the installation range. Complex mounting resistance and chip speed: 6000 / h Installation accuracy range: 0201-40 * 40mm, pin pitch 0.3mm Chip (supports the matching of electric feeders can be installed 0402, 0201) Number of feeders: 50 PCS Repair motor: Panasonic servo motor Guide rail: Taiwan TBI linear guide Drive method: Taiwan TBI ball screw Nozzle vacuum source: Japan CKD high speed switch vacuum generator, vacuum damage The minimum air volume of the pump: 80-120 liters / minute, the volume is greater than 60 liters Gas quality requirements: oil-water separation device, dust removal filter device, air pressure stabilization device Dimensions: 900 × 1140 × 900 mm Send Enquiry If you have any questions about the quotation or cooperation, please feel free to email us at sales@yushunli.com or use the enquiry form below. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
MORE>
pcba depaneling machine -YSV-1M size: 787x400x436 mm The separate size: 480mm Minimize Speed: Manual Minimize thickness: 0.6-3.5mm Machine Weight: 30Kg Manual Circular & Linear Blade Depanelizer 1.Round knife, manually cutting against lower linear knife, for reduced stress 2.Separate pre-scored PCB assembly without stress on either PCB or component 3.One touch programming of cut length with digital display 4.Separating speed is adjusted by a rotary knob 5.Handle Intermittent scoring or cut-outs 6.Board with projected component can be cut precisely 7.Large stainless steel platform on both side of cutting blade prevents board wobble and table height and angle are adjustable 8.Optional PCB conveyor belt to remove finished board 9.Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out pcba depaneling machine YSV-1M FEATURES: To avoid welding spot cracking and deceasing physical strength during cutting process. PCB remain stable when V-CUTTING,can make sure personal safety when moving back and forth. Introduced Siemens PLC controller,easy to operate and high relibility. Cutting principle is based on data convension. Apply to all kinds of V-CUT PCB board.
MORE>
Product Name :Pcb Loader Unloader 1. Strong , firm and stable design . 2. Userfriendly membrance control panel . 3.Top &bottom pneumatic& clamps to secure magazine rack. 4. No PCB break guaranty during loading & unloading . Technique Parameter : Description This unit is used for unloading of PCBS . Time Feed PCB Second 6 Approx Magazine change over time Approx 30 Seconds Power Soure &Consumption 100-230 VAC (Specify) .1ph , 300VA max Air pressure &Consumption 4-6 bar . 10Ltr/min max Conveyor Height 910±20mm (or specify) Conveyor Direction L –R / R-L (Option) PCB thickness 0.4mm min No of magazine Upper conveyor ,1 magazine / Lower conveyor , magazine. Indexing Pitch 1-4 (10mm pitch) Unit :mm Model YS-3525 YS-4533 YS-539 YS-3546 Effective PCB size (L*W)~(L*W) (50*50)~(350*250) (50*50)~(455*330) (50*50)~(530*390) (50*50)~(530*460) Dimension (L*W*H) 1000*1200*1200 1110*1360*1200 1185*1480*1200 1185*1625*1200 Size of magazine (L*W*H) 355*320*563 460*400*563 535*460*570 535*530*570 Weight Approx 140 kg Approx 200kg Approx 260kg Approx 300kg
MORE>
Features: 1. Positioning method: flight photo (1.2 million pixels) 2. Number of shafts: 2 arms * 6 mouths (12 tips total) 3. Mounting speed: Theory 25000CPH (IPC985 CPH18000CPH) Turn on blue light 9000~12000CPH 4.PCB top plate mode: double top material mechanism, adjustable splint mode 5. Mounting accuracy: ±500m@u+30/chip, ±50um@u+30/QFP 6. Corresponding components: lenses of various specifications 7.PCB size: 50W*50L (MM) 360W*1500L (MM) Thickness 0.38~4.2mm 8. Number of feeders: vibrating plate (2 groups of 6 channels) 9. Power supply pressure: AC220V/0.5~0.7mPA 10. Rated power: 2.5KW 11. Machine weight: 160kg 12. Dimensions: 1750L*1300W*1460H (mm)
MORE>
Producing 4 types materials at the same time capacity reach 250000CPH Features 1.Producing with Producing 4 types materials at the same time with high capacity, available for 5M, 50M or any length of Flexible strip and Roll to roll. 2.Dual arm four modul, 17 nozzles for each mounting part, part A or part B can be mounted separately or synchronously. 3.Calibration automatically, high precision, available for RGB. 4.Exclusive patent technology: Group to pick and group to mount. Technical parameter Note: The above mounting speed is the value under the optical state, the actual speed varies with the mounting product.
MORE>
Features 1. Apply to the 0.6 M, 0.9 M, 1.2 M rigid PCB and 0.5 M, 1 M LED flexible strip. Producing with 2~4 types of materials with high capacity. available for board with any proportion of LED chip and resistor. 2.Two mounting modules, 18 nozzles for each mounting part, part A and part B can be mounted separately or synchronously. 3.Calibration automatically, high precision, available for RGB. 4.Exclusive patent technology: Group to pick and group to mount. Technical parameter
MORE>
Automation SMT Placement Machine FX-3RA 1. Class leading speed, up to 42,000 cph 2. 0201* ~ 74mm×74mm / 50mm×150mm 3. Wide component range 4. Optimum line balance and highest throughput 5. Newly developed “Takumi Head” with changing recognition sensor height 6. JUKI’s laser centering technology is fast, accurate and reliable for a wide range of parts. Specification of JUKI SMT Line Machine Placement Machine Item/Model YSFX-3RAL YSFX-3RAXL Board size L size(410x360mm) YES NO L-Wide size(510x360mm)*1 YES NO XL size(610×560mm) NO YES Applicability to long PWB*1 800×360mm 800×560mm Component height 6mm YES Component size Laser recognition 0402(01005) ~ 33.5mm×33.5mm Placement speed (chip) Optimum 0.040Sec. / chip(90,000CPH)*2 IPC9850 66,000CPH*2 Placement accuracy Laser recognition ±0.05mm(±3σ) Feeder inputs Max.240 in case of 8mm tape (on a Electric double tape feeder) *1 L-Wide size , Applicability to long PWB is optional. *2 This speed does not apply to XL board size. Customers Factory For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email：evaliu@hk-yush.com
MORE>
