>
PCB Solder Paste Printer >
Fully Automatic PCB Solder Paste Printer Equipment Size 1140*1364*1404mm Weight 900KG Fully Automatic Solder Paste Printer
Machine Performance | |
Repeat Position Accuracy | ±0.01mm |
Print Accuracy | ±0.025mm |
NCP-CT(Excluding cleaning and printing) | 7.5s |
HCP-CT(Including cleaning and printing) | 19s/pcs |
Manufacturing process CT | 5min |
Transfer line CT | 3min |
Machine parameter | |
Power Source | AC:220 ±10%,50/60Hz2.2KW |
Air Pressure | 4~6Kgf/cm² |
Air Consumption | About 5L/min |
Operating Temperature | -20℃~+45℃ |
Working environment humidity | 30%~60% |
Machine dimension(without Tower light) | 1404(H) mm |
Machine Length | 1140(L) mm |
Machine Width | 1364(W) mm |
Machine Weight Approx | Approx: 900Kg |
Equipment load bearing requirements | 650Kg/m² |
1.Equipment Dimension Diagram
Equipment Size:1140*1364*1404mm
1.Main power supply: AC: 220 ± 10%, 50/60HZ3KW stable power supply with rated current, plug type: British system.
The electrical interface is shown in the above figure:
2.Main supply gas source: An industrial gas source with a stable pressure of 4.0~6kgf/cm2. Tracheal diameter 6mm/8mm/10mm/12mm
Universal type for the front of the trachea, the rear joint only needs to match the size of the trachea
3.Machine Weight:Approx:900kg
2.Equipment usage environment
1. Workshop temperature: 20C~+45 ℃
2. Workshop humidity: 30-60%
3. Electrostatic protection: ESD grounding and electrostatic protection are required
4. Floor load bearing: If the equipment is not used on the ground floor, please pay attention to the floor load bearing capacity, which must be ≥ 650kg/m²
Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information:
Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
SMT Automatic PCB Solder Paste Printing Machine YSL-4034 Introduction of SMT Printer 1. High positional accuracy, repeated positioning accuracy ±0.01mm; printing accuracy 0.025mm. 2. Support glue printing,Automatic control improves production efficiency, quality control and saves production cost. 3. Automatic PCB calibration,Squeegee pressure adjustable,Automatic printing,Automatic stencil cleaning. 4. Programmable motor controls separation speed and distance among squeegee, stencil and substrate, to realize multi-method separation. 5. Multi-functional PCB positioning system for convenient and accurate PCB positioning. 6. Programmable PCB lifting platform ensure the PCB to lift to a proper height. Specification of SMT Stencil Printer Model YSL-4034 YSL-5151 YSL-6561 YSL-1500(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 470*370 ~ 1800*750 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 80*50 ~ 1500*350 TransportDirection Left-Right; Right-Left; Left-Left; Right-Right Support System Magnetic Pin/Up-down table adjusted/support block Clamping System Side clamping, vacuum nozzle,Automation retractable Z pressure Printer Head Two independent motorised printhead Squeegee Type Stainless steel(standard),plastic Cleaning System Dry, Wet, Vacuum Inspection 2D Inspection(Standard) Power Supply AC:220±10%,50/60HZ,3Kw Control Method PC Control Dimension(mm) 1220*1355*1500 1220*1530*1500 1330*1530*1500 2500*1220*1500 Weight Approx:1250kg Approx:1300kg Approx:1300kg Approx:1800kg Model YSL-5134 YSL-6534 YSL-1200(LED) Frame Size(mm) 470*370 ~ 737*737 470*370 ~ 737*737 470*370 ~ 850*850 PCB Size(mm) 50*50 ~ 400*340 50*50 ~ 510*510 80*50 ~ 650*610 Dimension(mm) 1220*1355*1500 1330*1530*1500 2200*1200*1500 Weight Approx:1250kg Approx:1300kg Approx:1500kg SMT production line LED TV production line Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>PCB Fully Automatic Solder Paste Printer YSL-T9 Features Intelligent, high-precision PCB thickness adjustment platform lifting mechanism Adopts Germany brand screw rod, more stable operation and more accurate positioning The first online calibration technology in China Intelligent 2D check Technical parameters Basic Parameters Screen Frame Size(mm) 650(X)*420(Y)-1000(X)*880(Y) Thickness:20-40mm Min PCB(mm) 50(X)*50(Y)mm Max PCB(mm) 610(X)*510(Y)mm Thickness 0.2mm~6mm (Use jig when pcb less than 0 . 4mm) Curve <1% (Diagonal measurement) PCB backside Part Height 20mm Conveyor height 900±40mm Support Magnetic support, Magnetic piece , vacuum chamber (option) Clamp Side clamp(Standard),please read the option table Edge distance PCB process edge≥2.5mm Conveyor speed 0 ~ 1500mm/sec, increment 1mm Conveyor belt U type sync belt Stopper method Air cylinder Stopper position Set the PCB Stopper position according to the size of board Flow direction L-R、R-L、L-L、R-R depends on customer Print System Print speed 5 - 200mm/s adjustable Print head Step motor drive scraper lifting Scraper Steel scraper, rubber scraper (option) Scraper angle 60° Scraper pressure 0-20kg Accuracy Table adjusting range X=±3mm,Y=±7mm,θ=±1.5° Positional accuracy ±0.01mm Printing accuracy ±0.025mm Cleaning System Cleaning system Dry and wet(standard) ,vacuum model(optional) Liquid level detection Liquid level auto alarm detection Power Parameters Main power supply AC 220v±10% 50/60HZ Single phase Total power About 3kw Main air supply 4.5~6kgf/cm2 Machine weight about 950kg Machine dimensions 1400(L)x1630(W)x1525(H)mm Overall diagram Rack module Lifting module Platform alignment module Housing module Image capture module Stencil frame positioning module Squeegee module Display module Conveyor module Cleaning module Air and power input
MORE>PCB Fully Automatic Solder Paste Printer YSL-H510 Features Applicatelinear motor- high speed and high precision The printing leader of 03015 micro component New mechanical design-more stable and convenient New printing head design-high printing quality Technical parameters Basic Parameters Screen Frame Size(mm) 650(X)*550(Y)-737(X)*737(Y) Thickness:20-40mm Min PCB(mm) 50(X)*50(Y)mm Max PCB(mm) 510(X)*510(Y)mm Thickness 0.2mm~6mm (Use jig when pcb less than 0.4mm) Curve <1% (Diagonal measurement) PCB backside Part Height 18mm Conveyor height 900±40mm Support Magnetic support, Magnetic piece , vacuum chamber (option) Clamp Side clamp(Standard),please read the option table Edge distance PCB process edge≥2.5mm Conveyor speed 0 ~ 1500mm/sec, increment 1mm Conveyor belt U type sync belt Stopper method Air cylinder Stopper position Set the PCB Stopper position according to the size of board Flow direction L-R、R-L、L-L、R-R depends on customer Print System Print speed 5 - 200mm/s adjustable Print head Servo motor drive scraper lifting Scraper Steel scraper, Scraper angle 60° Scraper pressure 0-20kg Accuracy Table adjusting range X=±10mm, Y=±10mm, θ=±2° Positional accuracy ±0.01mm Printing accuracy ±0.025mm Cleaning System Cleaning system Dry and wet(standard) ,vacuum model(optional) Liquid level detection Liquid level auto alarm detection Power Parameters Main power supply AC 220v±10% 50/60HZ Single phase Total power About 3kw Main air supply 4.5~6kgf/cm2 Machine weight about 1300kg Machine dimensions 1350(L)x1625(W)x1535(H)mm Overall diagram 1.Machine housing module 2.Squeegee printing module 3.Stencil frame positioning module 4.Platform lifting module 5.Cleaning module 6.CCDimage capture module 7.Rail and conveyor module 8.Three color warning lamp 9.Display and input device
MORE>Direct selling SMT solder paste environmentally friendly high-temperature solder paste YSL-0307 Parameter Product Name Environmentally friendly solder paste Weight 500g producing area Dongguan Brand Yushunli Composition Composed of solder powder, flux, and other surfactants, thixotropic agents, etc Solder paste storage 1. Storage temperature and duration: the solder paste should be stored in a sealed temperature environment of 5-10C, the validity period. It is usually 6 months, and it needs to be used first in first. 2. Store the solder paste after opening: the solder paste on the screen board must be recycled into a clean and pollution-free empty bottle. After sealing, store separately in the cold storage. Do not mix with the new solder paste, and keep the solder paste after opening. The storage period is 5 days, and those that exceed the storage period should be scrapped to ensure product quality. 3. When the previous batch of unused solder paste is used again, if it is found to be dry, a small amount can be added. Solder paste special thinner stir well before use. Characteristic 1.Less residue after welding, high insulation resistance will not corrode PCB, and can meet the requirements of non-washing. 2.The continuous printing time is long, there is basically no slump several hours after printing, the viscosity change is small, and the patch element is not easy to shift. 3.Good wettability,excellent welding performance, and better ICT test performance without misjudgment. 4.The solder joints are bright, full, free of beadsand have moderate viscosity.
MORE>PCB Fully Automatic Solder Paste Printer YSL-120 Features Perfect solution for large size product printing Simple calibration and maintenance Stable printing quality Independent developed image processing software Technical parameters Basic Parameters Screen Frame Size(mm) 1000(X)*300(Y)-1500(X)*650(Y) Thickness:20-40mm Min PCB(mm) 80(X)*50(Y)mm Max PCB(mm) 1200(X)*360(Y)mm Thickness 0.2mm~6mm (Use jig when pcb less than 0 . 4mm) Curve <1% (Diagonal measurement) PCB backside Part Height 15mm Conveyor height 900±40mm Support Magnetic support, Magnetic piece , vacuum chamber (option) Clamp Side clamp and top clamp Edge distance PCB process edge≥2.5mm without PCB Conveyor speed 0 ~ 1500mm/s, increment 1mm Conveyor belt U type sync belt Stopper method Air cylinder Stopper position Set the PCB Stopper position according to the size of board Set by software Software settings Print System Print speed 5 - 200mm/s adjustable Print head Step motor drive scraper lifting Scraper Steel scraper, rubber scraper (option) Scraper angle 60° Scraper pressure 0-20kg Accuracy Table adjusting range X=±10mm,Y=±10mm,θ=±1.5° Positional accuracy ±0.01mm Printing accuracy ±0.025mm Cleaning System Cleaning system Dry and wet, vacuum model Liquid level detection Liquid level auto alarm detection Power Parameters Main power supply AC 220v±10% 50/60HZ Single phase Total power About 3kw Main air supply 4.5~6kgf/cm2 Machine weight about 1500Kg Machine dimensions 2350(L)x1350(W)x1590(H)mm Overall diagram Machine housing module CCDimage capture module Stencil lifting module of Z-axis Squeegee printing module Cleaning module Platform fine adjustment module Rail and conveyor module Three color warning lamp Display and input device
MORE>PCB Fully Automatic Solder Paste Printer YSL-T3 PLUS Features Auto balance the squeegee pressure which is adjustable Intelligent 2D detection Dry and wet cleaning.Option: vacuum cleaning Option: for thin board printing Advanced mark point recognition technology and stable system capability The first online calibration technology in China Technical parameters Basic Parameters: Screen Frame Size(mm) 520(X)*420(Y)-737(X)*737(Y) Thickness: 20 -40mm Min PCB(mm) 50(X)*50(Y)mm Max PCB(mm) 400(X) *310(Y) Thickness 0.2mm~6mm (use jig when pcb less than 0.4mm) Curve <1% (Diagonal measurement) PCB backside Part Height 10mm Conveyor height 900±40mm Support Magnetic support, Magnetic piece , vacuum chamber (option) Clamp Side clamp(Standard),please read the option table Edge distance PCB process edge ≥2 . 5mm Conveyor speed 0 ~ 1500mm/s, increment 1mm Conveyor belt U type sync belt Stopper method Air cylinder Stopper position Set the PCB Stopper position according to the size of board Flow direction L-R、 R-L、 L-L、 R-R depends on customer Print System Print speed 5 - 200mm/sec adjustable Print head Step motor drive scraper lifting Scraper Steel scraper, rubber scraper (option) Scraper angle 60° Scraper pressure 0-20kg Accuracy Table adjusting range X=±3mm,Y=±7mm,θ=±1.5° Positional accuracy ±0.01mm Printing accuracy ±0.025mm Cleaning System Cleaning system Dry and wet(standard) ,vacuum model(optional) Liquid level detection Liquid level auto alarm detection Power Parameters Main power supply AC 220v±10% 50/60HZ single phase Total power About 3kw Main air supply 4.5~6kgf/cm2 Machine weight about 900kg Machine dimensions 1140(L)x1380(w)x1530(H)mm (Standard) 1675(L)mm(Adding material module) 、 1675(L)mm(Add connection module) 、 2210(L)mm(Adding materials and connecting modules) Overall diagram Rack module Lifting module Platform alignment module Housing module Image capture module Stencil frame positioning module Squeegee module Display module Cleaning module Conveyor module Air and power input
MORE>PCB Fully Automatic Solder Paste Printer YSL-T5 Features Entirety frame design Multifunctional platform design Visual alignment to ensure the accuracy Integrated transport system Independent cleaning structure Squeegee lifting direct connects with screw rod structure Technical parameters Basic Parameters Screen Frame Size(mm) 650(X)X420(Y)-850(X)x850(Y) Thickness:20-40mm Min PCB(mm) 50(X)*50(Y)mm Max PCB(mm) 510(X)*510(T) Thickness 0.2mm~6mm (Use jig when pcb less than 0 . 4mm) Curve <1% (Diagonal measurement) PCB backside Part Height 20mm Conveyor height 900±40mm Support Magnetic support, Magnetic piece , vacuum chamber (option) Clamp Side clamp(Standard),please read the option table Edge distance PCB process edge less than 2.5mm Conveyor speed 0 ~ 1500mm/s, increment 1mm Conveyor belt U type sync belt Stopper method Air cylinder Stopper position Set the PCB Stopper position according to the size of board Flow direction L-R、 R-L、 L-L、 R-R depends on customer Print System Print speed 5 - 200mm/s adjustable Print head Step motor drive scraper lifting Scraper Steel scraper, rubber scraper (option) Scraper angle 60° Scraper pressure 0-20kg Accuracy Table adjusting range X=±3mm,Y=±7mm,θ=±1.5° Positional accuracy ±0.01mm Printing accuracy ±0.025mm Cleaning System Cleaning system Dry and wet(standard) ,vacuum model(optional) Liquid level detection Liquid level auto alarm detection Power Parameters Main power supply AC220v±10%50/60HZ Single phase Total power About 3kw Main air supply 4.5~6kgf/cm2 Machine weight about 950kg Machine dimensions 1530(L)x1680(W)x1540(H)mm Overall diagram Rack module Lifting module Platform alignment module Image capture module Stencil frame positioning module Squeegee module Display module Cleaning module Conveyor module Air and power input Housing module
MORE>High precision semi-automatic printing machine YSL-1200 Microcomputer control, touch screen display, menu operation interface; Scrapper floating.(Similar to MPM automatic printing press, the scraper can float up and down and automatically adjust the level of steel mesh); The scraper pressure is adjustable (the pressure of the scraper on the steel mesh can be adjusted according to the length of different types of scraper); Equipped with a frequency converter speed regulation system, the scraper running speed is stable; The work operation adopts the two-hand button switch operation, which is safe and reliable; The touch screen menu can independently set the overall pause time of the steel net; The positioning fixed mode of PCB plate has reference hole positioning, reference side positioning and reference hole reference side positioning, template positioning and other different precise positioning forms; The touch screen is equipped with time display function, printing times automatic counting function, screen protection function; Equipped with the scraper speed adjustable function and the emergency stop safety function; Printing mode: single, double and second start (menu setting is optional); Printing working status: automatic / semi-automatic / click three printing status (menu setting is optional); LED Line Total Solution Semi auto printer Conveyor Pick and place machine Conveyor Lead free reflow oven Printing machine technical configuration Equipment name High precision semi-automatic printing machine Model: YSL-1200 project serial number name Tender detailed technical parameters(Functional features) explain Basic parameters 1 moving direction Side-to-side mobility 2 Working table 1200mm×500mm 3 power source Single-phase (220V) 4 Boundary dimension Boundary dimension 5 Air source 0.5mpa-0.8mpa 6 Initial power 0.2KW 7 Weight 350KG 8 date of delivery 10-12 working days 9 Transportation and lifting Specialized transport unit travel mechanism 1 head feed motor Three-phase motor 60W 2 movement speed 0-2200mm/mins 3 guide rail Taiwan silver linear guide control segment 1 · PLC Siemens (for printing presses) 2 · touch screen 4.3# Display control screen 3 master cylinder piston SC80*150 4 Tool head cylinder CDU25-50 5 transducer ENC
MORE>Used equipment SMT Machine SMT Printer Solder Paste Printer Screen Printer for SMT Assembly Line Item Value Condition Used Weight (KG) 1500 Showroom Location United States, India Video outgoing-inspection Provided Machinery Test Report Provided Marketing Type New Product 2023 Product name Solder Paste Printer Usage SMD LED SMT Application SMT PCB Assembly Production Line Condition Original Used DELIVERY TIME 7-15 Days DELIVERY By Sea Package Vacuum Packaging + Wooden Box Packaging For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>Automatic Solder Paste Mixer Machine Product Description Features: 1. Place the solder paste at 45 degrees ,rotate along the axis direction, solder paste no longer adhere to the tank. 2. With double safety devices to ensure personal security. 3. Remove air bubbles while stirring. 4. Using a dedicated control circuit, fully taking process control in consideration. 5. Proven speed ratio,avoiding too much tin powder and temperature rise impacts solder paste quality. 6. Display and warning LED display, Flashing lights and buzzer warning. Specifications: Working capacity 500g*2 tins(option:1000g*2tins) Rotation speed First rotation:140ORPM;Second rotation:40ORPM Acceptable Tin diameter Φ60-Φ67 standard Time setting 0.1~9.9 Min,each o.1 min; 10~30 Min,each 1.0 min. Speed Adjustable Power Supply 1PHAC 220V 50/6OHz Dimension 470*450*470mm(W*D*H) Weight 45 Kg Application For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>High Precision And High Speed Fully Automatic Solder Paste Printer The G9+automatic tin paste printing press is a high-end model for SMT high-end application, which can satisfy the printing process requirements of 03015, 0.25 pitch, high precision and high speed. Technical Parameter/Specifications Substrate processing G9+ Maximum board size 450*340mm Minimum board size 50*50mm Board thickness 0.4~6mm Maximum board weight 3Kg Board edge clearance 2.5mm Board height 15mm Transport height 900±40mm Transport Speed 1500mm/s(Max) Program Control Transport direction One stage Board clamp Patented over the top clamping Side clamping Adsorption function Support System Magnetic Pin Support Block Manual up-down table Machine Parameter G9+ Power Source AC:220±10%,50/60HZ,2.5KW Air Pressure 4~6Kgf/cm² Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Operating Humidity 30%~60% Machine Dimension(Without Tower light) 1530(H)mm Machine Length 1172(L)mm Machine Width 1385(W)mm Machine Weight Approx: Approx:1000Kg Dimensional Appearance BTB Dimensional Appearance Performance CCD digita| camera system Total new optical path system, uniform circular light and high brightness of coaxial light source. With both light source system, brightness can adjust to an infinite loop, allowing different mark point can be easily recognize (including uneven mark point) such as tin plating, copper plating, silver plating, hot air soldering, FPC and various types of differentPCB color. Highly precise PCBthickness adjustmenttable Extremely reliable structure with stable XY movement. Manual adjustment makes it a breeze to accommodate different PCB thickness. Guide Rail positioning System New pattern patented guide rail can detachable, programmable flexible side clamp, specific to FPC, PCBwarpage, perform a unique camping plate device. Through software programming can automatically stretch out and draw back unaffected PCB thickness. Innovative squeegee structure design Adopt a comprehensive squeegee system which enhances stability and shelf-life. High speed stencil cleaning Downward dispensing cleaning structure successfully prevents clogged opening (which is always the root cause for ineffective cleaning) from taking place. The length of solvent dispensed can also be easily amended with software control. New multi-function interface Simplicity, Clearty understand, friendly user. Actual temperature and humidity monitor function. Option 4.0 For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator product. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>Fully Automatic Solder Paste Printer Specifications Machine Performance Repeat Position Accuracy ±0.015mm Print Accuracy ±0.03mm Based on the third party test system(CTQ)Verify the actua| solder paste printing position repeat precision Cycle time <15sec Machine parameter Power Source AC:220 ±10%,50/60Hz 3KW Air Pressure 4~6Kgf/cm² Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension(without Tower light) 1509(H) mm Machine Length 1970(L) mm Machine Width 1210(W) mm Machine Weight Approx Approx: 1500Kg Substrate processing Maximum board size 900*350mm Minimum board size 80*50mm Board thickness 0.8~6mm Maximum board weight 10Kg Board edge clearance 3.5mm Board height 15mm Transport height 900±40mm Transport speed 1500mm/s(Max) Transport direction One stage 1.Equipment Dimension Diagram Equipment Size:1970*1210*1509mm Image and optical system Using uniform ring light and high brightness coaxial light, with promise brightness adjustment function, then all types of Mark points can be well recognized (Including the rugged Mark points), applicable for tin plating, coppering, gold plating, tin spraying, FPC and other typesPCB with of different colors. With GKG patent mathematical model, able to ensure high accuracy Electric Control System Safe and tidy distribution of electric circuit and gas circuit Electric circuit and gas path are positioned vertically at the two sides and the back of machine, which is easy to check and repair. Chinese/English Operating Interface The machine adopts windowsXP/win7 operating interface with GKG user friendly software.Chinese/English selectable, Menu/Operating Journal/Breakdown Record/Breakdown Diagnosis/Error Analysis/Light Alarm etc 2D Solder Paste Print Quality Inspection and Analysis System The 2D system immediately detects solder paste deposition defects such as deviation ,lack paste, miss paste ,paste joint etc, and guarantees print quality. Adjustable Stepping Motor -Programmable &Floating Print-Heads Unique long platform and track fixed design, to ensure stable support PCB.Short squeegee horizontal printing, pressure stability,save solder paste. For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT KeywordsSMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine.SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator product. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>Fully Automatic Solder Paste Printer Machine Performance Repeat Position Accuracy ±0.01mm Print Accuracy ±0.025mm NCP-CT(Excluding cleaning and printing) 7.5s HCP-CT(Including cleaning and printing) 19s/pcs Manufacturing process CT 5min Transfer line CT 3min Machine parameter Power Source AC:220 ±10%,50/60Hz2.2KW Air Pressure 4~6Kgf/cm² Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension(without Tower light) 1404(H) mm Machine Length 1140(L) mm Machine Width 1364(W) mm Machine Weight Approx Approx: 900Kg Equipment load bearing requirements 650Kg/m² 1.Equipment Dimension Diagram Equipment Size:1140*1364*1404mm 1.Main power supply: AC: 220 ± 10%, 50/60HZ3KW stable power supply with rated current, plug type: British system. The electrical interface is shown in the above figure: 2.Main supply gas source: An industrial gas source with a stable pressure of 4.0~6kgf/cm2. Tracheal diameter 6mm/8mm/10mm/12mm Universal type for the front of the trachea, the rear joint only needs to match the size of the trachea 3.Machine Weight:Approx:900kg 2.Equipment usage environment 1. Workshop temperature: 20C~+45 ℃ 2. Workshop humidity: 30-60% 3. Electrostatic protection: ESD grounding and electrostatic protection are required 4. Floor load bearing: If the equipment is not used on the ground floor, please pay attention to the floor load bearing capacity, which must be ≥ 650kg/m² For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT KeywordsSMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine.SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator product. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>Fully Automatic Solder Paste Printer Machine Performance Repeat Position Accuracy ±0.01mm Print Accuracy ±0.025mm NCP-CT(Excluding cleaning and printing) 7.5s HCP-CT(Including cleaning and printing) 19s/pcs Manufacturing process CT 5min Transfer line CT 3min Machine parameter Power Source AC:220 ±10%,50/60Hz 2.2KW Air Pressure 4~6Kgf/cm² Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension(without Tower light) 1460(H) mm Machine Length 1152(L) mm Machine Width 1362(W) mm Machine Weight Approx Approx: 900Kg Equipment load bearing requirements 650Kg/m² 1.Equipment Dimension Diagram Equipment Size:1152*1362*1460mm BTB Dimensional appearance diagram 1.Main power supply: AC: 220 ± 10%, 50/60HZ 3KW stable power supply with rated current, plug type: British system. The electrical interface is shown in the above figure: 2.Main supply gas source: An industrial gas source with a stable pressure of 4.0~6kgf/cm2. Tracheal diameter 6mm/8mm/10mm/12mm Universal type for the front of the trachea, the rear joint only needs to match the size of the trachea 3.Machine Weight:Approx:900kg 2.Equipment usage environment 1. Workshop temperature: 20C~+45 ℃ 2. Workshop humidity: 30-60% 3. Electrostatic protection: ESD grounding and electrostatic protection are required 4. Floor load bearing: If the equipment is not used on the ground floor, please pay attention to the floor load bearing capacity, which must be ≥ 650kg/m² For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT KeywordsSMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine.SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator product. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>Fully Automatic Solder Paste Printer Machine Performance Repeat Position Accuracy ±10μm Print Accuracy ±23μm Cycle Time <12sec Machine parameter Power Source AC:220 ±10%,50/60Hz 3KW Air Pressure 4~6Kgf/cm² Machine Weight Approx Approx: 1500Kg Machine Dimensions 2570(L)*1210(W)*1509(H)mm 1.Equipment Dimension Diagram Equipment Size:2570*1210*1509mm Image and optical system Using uniform ring light and high brightness coaxial light, with promise brightness adjustment function, then all types of Mark points can be well recognized (Including the rugged Mark points),applicable for tin plating,coppering, gold plating, tin spraying, FPC and other types PCB with of different colors. With GKG patent mathematical model, able to ensure high accuracy Electric Control System Safe and tidy distribution of electric circuit and gas circuit Electric circuit and gas path are positioned vertically at the two sides and the back of machine, which is easy to check and repair. Chinese/English Operating Interface The machine adopts windows XP/win7 operating interface with GKG user friendly software. Chinese/English selectable, Menu/Operating Journal/Breakdown Record/Breakdown Diagnosis/Error Analysis/Light Alarm etc 2D Solder Paste Print Quality Inspection and Analysis System The 2D system immediately detects solder paste deposition defects such as deviation ,lack paste, miss paste ,paste joint etc, and guarantees print quality. Adjustable Stepping Motor-Programmable &Floating Print-Heads Unique long platform and track fixed design, to ensure stable support PCB.Short squeegee horizontal printing, pressure stability,save solder paste. For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT KeywordsSMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine.SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator product.
MORE>PCB Solder Paste Printer Product technical parameters Process Parameters Specification Printing Accuracy ≥2 Cpk@±25μm@,6o Repeat Position Accuracy ≥2 Cpk@±10μm@,6a Cycle Time 7s Maximum Print Area 400mm(X)x340mm(Y) Screen Frame Size 470mmx370mm-737mmx737mm Screen Frame Thickness 20mm-40mm Print Pressure 0kg-10kg Print Speed 1mm/sec-200mm/sec Print Gap 0mm-20mm Electrical configuration and environmental requirements Specification Voltage 220V,±10%,single phase 50/60Hz。220Volts +/-10%.Single phase 50/60Hz Power 2kw Air Supply 0.45-0.6kg/cm² Temperature 25±3℃ Humidity 30%-70% 30%- 70% relative humidity (non condensing) For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>Fully Automatic Solder Paste Printer Machine Parameter Power Soures AC: 220 ±10%, 50/60HZ 2.2KW Air Pressire 4-6Kgf/cm² Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension (Without Tower light) 1460mm Machine Lengyh 1150mm Machine Width 1380mm Machine Weight Approx Approx:900kg For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>Fully Automatic PCB Solder Paste Printer Machine Parameter Power Source AC:220±10%, 50/60Hz2.2KW Air Pressure 4~6Kgf/cm² Air Consumption About 5L/min Operating Temperature -20℃~+45℃ Working environment humidity 30%~60% Machine dimension (without Tower light) 1500(H) mm Machine Length 1258(L) mm Machine Width 1425(W) mm Machine Weight Approx Approx: 1100Kg Equipment load bearing requirements 650Kg/㎡ Usage Smt Production Line Application SMT PCB Assembly Production Line Package Wooden Case For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT Keywords SMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine. SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator production base in China. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email:evaliu@hk-yush.com
MORE>