High quality PCBA router machine, desktop PCB router, PCB V-cut machine, PCB separator, LED depaneling, for PCBA cutting.
Features:
1,New CCD system,new vision system can correspond to all kinds of pcb mark.with visual counterpoint correction function.
2,The sensor can monitor the milling cutter state in real time, and effectively prevent the continuous operation of the cutter.
3,Using high speed spindle, cutting stress is greatly reduced, precision is high, inertia is small, and response is fast.
4,Ion air gun will remove static electricity on PCB surface and prevent dust from adsorbing on PCB.
5,Dual platform structure, can deal with different products at the same time, while the dual platform can be combined into a single platform, enhance the flexibility of equipment
6,Adopt CNC special controller,high stability and strong anti-interference.
7,The separated vacuum dust collector adopts high efficiency motor with high suction and low noise.
8, Humanized operation system design, simple operation, flexible
.
Specifications of SMT PCBA Router Machine
Specifications
550x650mm PCBA Router Machine SMT PCBA Router Machine Large platform
Model
YSVC-650
YSVC-650B
YSVC-650A
Pcb Size (Double platform, Special size option)
300*350mm
350*450mm
550*650mm
PCB thickness
0.3-3.5mm
Dimension
1075*1430*1460mm
1125*1530*1460mm
1225*1530*1460mm
Weight(with vacuum cleaner)
1000KG
Dust Collection Method
Vacuum cleaning
Air volume of vacuum cleaner
28~35cm3/min
Vacuum cleaner Dimension
640*785*1760mm
Voltage of the Dust Collector
380V,50/60HZ,3kw
Basic parameter Specifications:
1. Single side working size: 290mm X 350mm
3. X-Y AC Servo speed: 0-1000mm/sec
5.X-Y repetition accuracy: ±0.01mm
7. CCD camera calibration accuracy: ±0.01mm
9. NSK spindle speed: Max.60,000rpm
11. PCB board cutting thickness: 0.2mm-6.0mm
13. Dust collection cabinet size: 640mm×785mm×1760mm(D×W×H)
15. Weight of main engine + dust collector: 800 KG
On the dust features: milling cutter board machine is also called curve board machine, using electrostatic brush seal cutting point. Independent for single cut point vacuuming. Greatly improve the effect of vacuuming.
Windows OPERATION INTERFACE friendly switching between Chinese AND English, ILLUSTRATED Windows operation interface, editing program is simple, can quickly complete multi-point programs.
Software sets milling cutter segmentation function, automatic cutting compensation, prolong the service life of milling cutter, reduce the cost.
CNC PCB Router CNC PCB router , PCB board routing machine YSVJ-650 MLF-F01 Performance Parameters Overall Dimensions(W*D*H) 1220mm*1450mm*1420mm Weight 550KG Height offset 60~110mm Manipulator Motor type JiaBao series Positioning repeatability 0.001mm Axis working area(max) 680mm*360mm*50mm Work station PCB fixation standard,specialization PCB loading/unloading manual PCB size (max) 322mm*322mm PCB thick (max) 5mm Fixturing Rigidity fixturing standard Fixturing fixation machinery Spindle Motor Power 400W Spindle 50000rpm/min Protect self/wind cooling Change cutter Specialization Routing capability Cutting speed(max.) 100mm/s Driving speed(max.) 3000mm/s Precision of cutting 0.01mm Vacuum System Vacuum power 2.2KW AC 380V Vacuum plumb Utilities Power 2.2KW AC380V
MORE>
Introduce Features:： 1.High Quality PCBA Router Machine, On-line PCB Router, PCB depaneling router Machine, PCBA Separator, LED pcb Depaneling, For PCBA. 2.On-line PCBA Router is a High-Precision High-Speed Dual-Platform On-line PCBA Router, Which is Used in Smart Phones, Smart Wear, Smart Home, Tablet Computers, Automotive Electronics, Medical Devices, Aerospace, Military And Other Fields. 3.New CCD System,New Vision System Can Correspond To All Kinds of PCB Mark Point.With Visual Counterpoint Correction Function. 4.The Sensor Can Monitor The Milling Cutter State in Real Time, and effectively prevent the continuous operation of the cutter. 5. Using Germany KAVo 4033AC-ESD high speed spindle, cutting stress is greatly reduced, precision is high, inertia is small, and response is fast. 6.Ion air gun will remove static electricity on PCB surface and prevent dust from adsorbing on PCB. 7.Automatic loadering - picking and placing – cutting – unloadering pcba,unloadering solution can be option. 8.Adopt CNC special controller,high stability and strong anti-interference. 9.The separated vacuum dust collector adopts high efficiency motor with high suction and low noise. 10.Realize automation, save manpower and improve quality. 11.Automatic storage product information, automatic adjustment conveyor width, improve the speed of line change. 12.Loadering pcba the automatic splint function replaces the traditional cylinder and is more accurate. 13.Dual working platform to improve cutting efficiency. 14.Pcba can be cut and move at the same time to improve productivity efficiency. 15.Standard MES or ERP connection ports, real-time connection to the central database. 16.Bar code camera is option, which can scan barcode automatically and upload. Specification: YASTM-4C- Model YASTM-4C Pcb Size(Special size optional) 300*350mm xyz Drive Mode: ac servo motor Number of motion axes: 7 axes Program teaching method: color CCD image intuitive teaching input Operation interface: win7 window operation interface Upper vacuum power: 2hp, lower dust collector power: 3hp (option 5hp) Cutting Spindle Syco Tec 4033 AC-ESD (Germany): max80000rpm (automatic tool change) x-y ac servo speed: 0-1000mm/sec z ac servo speed: 0-800mm/sec x-y repeatability: ±0.02mm Cutting accuracy: ±0.08mm CCD camera calibration accuracy: ±0.01mm Depaneling stress value: below 300uε PCB thickness 0.8~6.0mm PCB board cutting thickness: 0.2mm-6.0mm Main engine and dust collector voltage: 220v 1φ and 3φ Power consumption: 3.5kva Static elimination gun Vision system: high-resolution digital camera Drive motor: AC brushless servo motor Mechanical pick and place arm: anti-static vacuum nozzle Feeding method: rail conveying Discharge method: belt conveying or carrier output or rail conveying Transfer method: vacuum suction nozzle adsorption transfer Flow direction: left → right Program backup: usb interface Control method: dedicated controller Dust collection cabinet size: 640mm×785mm×1760mm(d×w×h) Dimension : 2014mm×1230mm×1650mm(d×w×h) Host + dust collector weight: 1000 kg Operation and Data Storage： PC System Dust Collector Dust Collection Method Vacuum cleaning Air volume of vacuum cleaner 12~20cm3/min Vacuum cleaner Dimension 750*600*620mm Voltage of the Dust Collector 380V,50/60HZ, 1.2k The structure of the vacuum suction cup to take the plate Pick and place device automatic loading and unloading (modular vacuum suction claw, vacuum device, can be independently controlled) Transmission structure X2 axis moves Z2, Z3 axis sucks, AC servo motor control. Board taking speed 0-1000mm/sec (can be set)
MORE>
Basic specifications: 01. X, Y cutting speed: 0 ~100mm/s 02. Machine Repeat Accuracy: ± 0.01mm 03. X, Y1,Y2 ,Z Control Methods: Industrial IPC and PC 04. X, Y1,Y2 ,Z Drive Mode: AC Fiber Optic Servo Motor 05. Machine Operation and Data Storage: PC System 06. Cutting accuracy: ± 0.05mm 07. Spindle speed: Max 60000rpm 08. Host voltage: 220V 1ψ 50 / 60HZ 09. Air pressure supply: above 4.5kg/cm2 10. Power Consumption: 1.8KVA 11. Dust Collection: Lower Dust Collection (Standard) or Upper Dust Collection 12. Dust collector voltage: 220V (380V) 3ψ 13. Upper dust collector size: L650*W400*H1350mm 14. Dust collector size: L665*W635*H1650mm Model difference: Workbench Model Specifications Work Size Machine Dimension W.D.H Net Weight Double Tables YSVC-600-AS Standard Type 350*350mm 1382*1056*1500mm 840KG Double Tables YSVC-600AW Widened 500*500mm 1682*1356*1500mm 940KG
MORE>
Basic specifications： 1. X, Y cutting speed: 0 ~100mm/s 2. Machine Repeat Accuracy: ± 0.01mm 3. X, Y1,Y2 ,Z Control Methods: Industrial IPC and PC 4. X, Y1,Y2 ,Z Drive Mode: AC Fiber Optic Servo Motor 5. Machine Operation and Data Storage: PC System 6. Cutting accuracy: ± 0.05mm 7. Spindle speed: Max 100000pm 8. Host voltage: 220V 1ψ 50 / 60HZ 9. Air pressure supply: above 4.5kg/cm2 10. Power Consumption: 3KVA 11. Dust Collection: Upper Dust Collection 2HP 12. Dust collector voltage: 380V 3ψ 13. Upper dust collector size: ：L650*W400*H1350mm Workbench Model Specifications Work Size Machine Dimension W.D.H Net Weight Double Tables MT-3000-IN-AS Standard Type 300*300mm 1680*1298*1700mm 1100KG Double Tables MT-3000-IN-AW Widened 500*450mm 1902*1373*1700mm 1400KG
MORE>
Automatic PCB Depanelist-YSVC-650 feature: 1.High efficiency:It merely needs a few minutes to make a piece of PCB. 2.Safety :Enclosed Work Area ;Door Interlock Sensors ;Emergency Stop Button specifications I. Hardware System models / types Windows XP Professional Overall FootPrint (LxWxH) 800mm*850mm*1700mm Weight (Approximate) 150KG Adjustable machine footings (for height) 60~110mm Manipulator Manipulator Motor Panasonic MINAS A5 series Manipulator Repeatability 0.001mm Axis configuration Maximum Axis Travel (X,Y,Z) 400mm*650mm*50mm Work station Board Positioning Fixture positioning, thimble universal positioning, vision correction Loading/Unloading manual Routing Range 320mm*320mm Panel Thickness 3mm Fixturing Rigid Fixturing Universal thimble & anti-static fixture Top Clamp Using hole positioning Spindle Motor Power 100W Max. speed 60000rpm/min Cooling Natural cooling and air-cooled Router bit size 3mm*3mm Tool change Use Special wrench Routing capability Max routing speed 100mm/s Repeatability 0.02mm Vacuum System Power 0.75KW220V Single-phase motor Filtration Vertical and horizontal Utilities Power 1.5KW AC220V Air supply 4~5KG/cm2 Basic specifications: 01. X, Y cutting speed: 0 ~100mm/s 02. Machine Repeat Accuracy: ± 0.01mm 03. X, Y, Z Control Methods: Industrial IPC and PC 04. X, Y, Z Drive Mode: AC Servo Motor 05. Machine Operation and Data Storage: PC System 06. Cutting accuracy: ± 0.05mm 07. Spindle speed: Max 60000rpm 08. Host voltage: 220V 1ψ 50 / 60HZ 09. Air pressure supply: above 4.5kg/cm2 10. Power Consumption: 1.5KVA 11. Dust Collection: Dust Collection (Standard) or Dust Collection 12. Dust collector voltage: 220V (380V) 3ψ 13. Upper dust collector size: L650*W400*H1350mm 14. Dust collector size: L665*W635* Our advantage: 1.we can do the designs according to the customers' requirement 2.we can offer you the high quality & reasonable price 3.we can offer your a good after-sell service . 4.we have strong professinal design team
MORE>
Maintenance Program: •Provides the fine tuning revise y diagrammatic machine. •Windows Operational Environment: Easy to learn and operate.
MORE>
One. Technical specifications: 1. Sub-board working range: 300mmx350mm 2.xyz drive mode: ac servo motor 3. Number of motion axes: 7 axes 4. Program teaching method: color ccd image intuitive teaching input 5. Operation interface: win7 window operation interface 6. Upper dust collector power: 2hp, lower dust collector power: 3hp (option 5hp) 7. Cutting spindle sycotec (Germany): max80000rpm (automatic tool change) 8.x-y ac servo speed: 0-1000mm/sec 9.z ac servo speed: 0-800mm/sec 10.x-y repeatability: ±0.02mm 11. Cutting accuracy: ±0.08mm 12. ccd camera calibration accuracy: ±0.01mm 13. Sub-plate stress value: below 300uε 14. Tool diameter: 0.8-2.3mm 15. pcb board cutting thickness: 0.2mm-6.0mm 16.Voltage of host and dust collector: 220v 1φ and 3φ 17. Power consumption: 3.5kva 18. Static elimination gun 19. Vision system: high-resolution digital camera 20. Drive motor: AC brushless servo motor 21. Mechanical pick and place arm: anti-static vacuum nozzle 22. Feeding method: rail conveyor 23. Discharge method: belt conveyor or carrier output or track conveyor 24. Transfer method: vacuum nozzle suction transfer 25. Flow direction: left→right 26. Program backup: usb interface 27. Control method: dedicated controller 28. Dust collection cabinet size: 640mm×785mm×1760mm(d×w×h) 29. Machine size: 2014mm×1230mm×1650mm(d×w×h) 30. Main machine + dust collector weight: 1000 kg Two: Gripper type plate taking structure 1. Clamp the product sub-board jig and place it on the sub-board of the processing platform. After the processing is completed, clamp the sub-board jig and place the track into the lower process again. Three: The way the special product separates the board and the jig enters the track Four: Special product sub-board fixture orbital discharging 1. After the on-line automatic dividing machine product is cut, the picking jaw clamps the entire product fixture and places it on the discharge track for the next production process. Five: Automatic tool change method 1. Using automatic tool change spindle imported from Germany. Save time, realize automation, reduce human factors, high precision and strong stability 2. Built-in five groups of milling cutter tool magazines, convenient and automatic change of milling cutters, to meet the needs of sub-board processing. Six: The structure of the vacuum sucker to take the board 1. Pick and place device: automatic loading and unloading (modular vacuum suction claw, vacuum device, independent control) 2. Transmission structure: X2 axis movement Z2, Z3 axis suction, AC servo motor control. 3. Picking speed: 0-1000mm/sec (can be set) Seven: Discharging method of special product fixture tray 1. The vacuum sucker reclaiming shaft vacuum sucks the cut products at one time and places the special product fixture to transport the next production process.
MORE>
Offline splitter software interface Upper suction structure Lower dust suction structure Double working platform structure Lower dust suction spindle structure Three-axis electromechanical control structure Dust collector
MORE>
One. Technical specifications: 1. Sub-board working range: 180mmx180mm 2.XYZ drive mode: AC servo motor 3. Number of motion axes: 7 axes 4. Program teaching method: color CCD image intuitive teaching input 5. Operation interface: WIN7 window operation interface 6.Upper suction power: 2HP 7. Cutting spindle Sycotec (Germany): MAX80000rpm (automatic tool change) 8. X-Y AC Servo speed: 0-1000mm/sec 9.Z AC Servo speed: 0-800mm/sec 10. X-Y repeatability: ±0.02mm 11. Cutting accuracy: ±0.08mm 12. CCD camera calibration accuracy: ±0.01mm 13. Sub-plate stress value: below 300uε 14. Tool diameter: 0.8-2.3mm 15. PCB cutting thickness: 0.2mm-6.0mm 16.Voltage of host and dust collector: 220V 1φ and 3φ 17. Power consumption: 3.5KVA 18. Static elimination gun 19. Vision system: high-resolution digital camera 20. Drive motor: AC brushless servo motor 21. Mechanical pick and place arm: anti-static vacuum nozzle 22. Feeding method: rail conveyor 23. Discharge method: belt conveyor or carrier output or track conveyor 24. Transfer method: vacuum nozzle suction transfer 25. Flow direction: left→right 26. Program backup: USB interface 27. Control method: dedicated controller 28. Dust collection cabinet size: 640mm×785mm×1760mm(D×W×H) 29. Machine size: 1340mm×800mm×1528mm(D×W×H) 30. Main machine + dust collector weight: 1000 KG Two: Claw-type plate taking structure 1. Clamp the product sub-board jig and place it on the sub-board of the processing platform. After the processing is completed, clamp the sub-board jig and place the track into the lower process again. Three: the way that the special product separates the board and the jig enters the track Four: special product sub-board fixture orbital discharging 1. After the product is cut, the picking jaw clamps the entire product jig and places it on the discharge track for the next production process. Five: automatic tool change 1. Using automatic tool change spindle imported from Germany. Save time, realize automation, reduce human factors, high precision and strong stability 2. Built-in four groups of milling cutter tool magazines, convenient and automatic change of milling cutters, to meet the needs of sub-board processing. Six: The structure of the vacuum sucker to take the board 1. Pick and place device: automatic loading and unloading (modular vacuum suction claw, vacuum device, independent control) 2. Transmission structure: X2 axis movement Z2, Z3 axis suction, AC servo motor control. 3. Picking speed: 0-1000mm/sec (can be set) Seven: Special product belt discharge method 1. The vacuum sucker reclaiming shaft vacuum sucks the cut products at one time and places the special product fixture to transport the next production process.
MORE>
In line 2 way Sliding Exchanger PCB Router Desktop PCB Router Milling Machine - Desktop PCB Router Milling Machine Manufacturers, Suppliers and Exporters on hk-yush.com Electronics Production Machinery Features: 1. Adopting the collect dust downside mode, in line with the theory of free fall, the dust collecting effect is good. 2. Special fixtures are more securely fixed to avoid cutting accuracy errors caused by poor basic positioning. 3. The system automatically corrects according to the installation position of the product to ensure high-precision cutting requirements. 4. Installed with a static eliminator to remove electricity, dust and air nozzles continue to work, to eliminate static electricity generated when high-speed spindle cutting, to avoid damage caused by static electricity, to avoid the accumulation of dust due to static electricity. 5, Use safety doors to reduce noise and dust and improve safety 6, The cleaner is equipped with a dust collection box (Maintenance can be arranged according to capacity cutting requirements or dust collection time). Application Suitable for split stamp hole PCB board and irregular joint PCB board Technical Parameters： Function Items Hardware Demand Model YS-300 Dimension L623*W737*H587mm Power 220V/50HZ Machine power 3.6KW Weight About 300KG Cleaner Dimension Inside / L650*W500*H550mm Cleaner Wattage 2.2KW/220V Table Dimension 260mm*260mm Cutting Speed 0-100mm/s X,Y,Z axis Driving Speed X, Y axis 0-1000mm/s (min), Z axis 0-750mm/s (min), servo motor drive Repeatability Accuracy ±0.01mm Working Area X:0-260mm,Y:0-260mm,Z:0-80mm PCB Thickness 0.5-5mm Router Bit Diameter 0.8-3.0mm Cutting Precision ±0.01mm Cutting Ability Linear, Circular, U-curve, Arc, L-curve Cutter Change Manual, tools needed Cutter Attrition System The number of milling cutters (0-5 section) Cutter Break Detection none Cutter Life Control controlled by Program Table Number 1pc Spindle Speed 60000rpm Spindle Cooling System Air cooling mode Cleaner Mode collect dust downside Working Power 220V ,50HZ Air press 0.4Mpa Safety Device Safety door and door lock sensor Mode offline, load and unload PCBA by hand Auto failure test and repair mode Self-diagnosis,display failure information in real time, query IO state visually, easy for troubleshooting Computer & Operation system IPC, Windows 7 Program Backup USB Software access control Password protection,the operator enter corresponding interface according to authority to protect important parameters.) Programming Visual interface, the cutting point capacity for a single program should be over 400, dynamic simulation of cutting schedule Auto correction of the mark point Yes Fixture universal fixture Voice control ≤78 dB(measured in 1M’s distance ) Maintenance Period 1 years Technology Support (Offer service of operation, programming, hardware caring and maintenance training; free upgrade of application. )
MORE>
One. Technical specifications: 1. Unilateral working size: 450mm X 500mm 2. Two worktables enter and exit at the same time: 900mm X 500mm 3. X-Y AC Servo speed: 0-1000mm/sec 4. Z AC Servo speed: 0-800mm/sec 5. X-Y repeatability: ±0.02mm 6. Cutting accuracy: ±0.08mm 7. CCD camera calibration accuracy: ±0.01mm 8. Sub-plate stress value: below 300uε 9.NSK spindle speed: Max.60,000rpm 10. Tool diameter: 0.8-2.3mm 11. PCB board cutting thickness: 0.2mm-6.0mm 12. Dust collector power: 3HP (option 5HP) 13. Dust collection cabinet size: 640mm×785mm×1760mm(D×W×H) 14. Machine size: 1450mm×1626mm×1460mm(D×W×H) 15. Weight of host + dust collector: 900 KG Two: Double workbench structure 1. It adopts dual slide rails and double cylinders to operate. It can cut different types of products at the same time, which greatly reduces the waiting time for picking and placing the board. At the same time, the dual platform can be changed to a large single platform to increase the working size. Improve equipment flexibility. Three: Lower dust suction spindle structure 1. Fully-automatic splitting machine widens and enlarges EXE-880XL adopts high-speed imported spindle to cut and split the board, which greatly reduces the cutting stress, has high precision, low inertia and fast response. 2. The milling cutter detection system monitors the state of the milling cutter in real time, effectively preventing the continued operation after the cutter is broken. 3. Brand new vision system, uniform ring light source, with brightness adjustment function, making various types of Mark points better recognized, adapting to various types of PCBs with different colors, such as tin plating, copper plating, gold plating, tin spraying, and various types of PCBs. All systems are equipped with vision Alignment compensation function. Four: the structure of the bottom vacuuming method 1. The funnel seal design, the suction port adopts a 45-degree oblique angle, to reduce the vortex phenomenon of dust in the interior. Five: CNC dedicated controller 1. The independent CNC dedicated controller integrates the control part, with strong loop control stability, high precision, fast response and transmission, and strong anti-interference. Six: Dust Collector 1. Adopt high-efficiency motor and fan blades, large suction, built-in polyester needle felt dust bag with large porosity, good air permeability, strong oxidation resistance, and noise can be controlled within 80 decibels.
MORE>
Technical specifications: 1. Working range of sub-plate: 180mmx180mm 2.XYZ drive mode: AC servo motor 3. Number of movement axes: 7 axes 4. Program teaching mode: color CCD image intuitive teaching input 5. Operation interface: WIN7 window operation interface 6. Upper vacuum power: 2HP, lower dust collector power: 3HP (option 5HP) 7. Cutting spindle Sycotec (Germany) : MAX80000rpm (automatic tool change) 8.X-Y AC Servo speed: 0-1000mm/sec 9.Z AC Servo speed: 0-800mm/sec 10.X-Y repetition accuracy: ±0.01mm 11.Cutting accuracy: ±0.08mm 12.CCD camera calibration accuracy: ±0.02mm 13. Plate stress value: 300uε below 14. Tool diameter: 0.8-2.3mm 15.PCB board cutting thickness: 0.2mm-6.0mm 16. Main engine and dust collecting mechanical and electrical pressure: 220V 1φ and 3φ 17. Power consumption: 3.5KVA 18. Static elimination gun 19. Vision system: high resolution digital camera 20. Drive motor: AC brushless servo motor 21. Mechanical fetching and releasing arm: anti-static vacuum suction nozzle 22. Feeding mode: rail transportation 23. Discharging mode: belt conveying or vehicle output or rail conveying 24. Load shifting mode: vacuum suction nozzle adsorption load shifting 25. Flow direction: left → right 26. Program backup: USB interface 27. Control mode: special controller 28 Dust collection cabinet size: 640mm×785mm×1760mm(D×W×H) 29. Machine size: 1340mm×800mm×1528mm(D×W×H) 30. Weight of main engine + dust collector: 1000 KG Device configuration One.Claw type plate taking structure 1. Clamp and place the product split-plate fixture on the processing platform split-plate. After the processing is completed, clamp and place the split-plate fixture on the placement track and flow into the next procedure. Two.Special product split-plate fixture into the track way Three.Special product split-plate jig track discharge 1. After the product is cut, the material clamping claw will take the entire product jig and place the discharge track to transport the next production process. Four.Automatic tool change mode 1. Miniaturized on-line board splitter adopts automatic tool change spindle imported from Germany. Save time, realize automation, reduce human factors, high precision, strong stability 2. Built-in four groups of milling cutter library, easy to replace the milling cutter automatically, to meet the needs of plate processing. Five.Vacuum suction plate taking structure 1. Take and place device: automatic loading and unloading (modular vacuum suction claw, vacuum device, can be independently controlled) 2. Transmission structure: X2 axis moves Z2, Z3 axis absorbs, AC servo motor control. 3. Board speed: 0-1000mm/sec (adjustable) Six.Special product belt discharging mode 1. The vacuum sucker feeding shaft takes the cut product through one-time vacuum suction, places the special product fixture and transports it to the next production process.
MORE>
One. Basic Parameters and Specifications: 1. Working range of sub-plate: 300mmx350mm 2. XYZ drive mode: ac servo motor 3. Number of movement axes: 9 axes 4. Program teaching mode: color ccd image intuitive teaching input 5. Operation interface: win7 window operation interface 6. Upper vacuum power: 5hp, lower dust collector power: 3hp (option 5hp) 7. Cutting spindle sycotec (Germany) : max80000rpm (automatic tool change) 8. X-y ac servo speed: 0-1000mm/sec ; z ac servo speed: 0-800mm/sec 10. X-y repetition accuracy: ±0.01mm 11. Cutting accuracy: ±0.02mm 12. Ccd camera calibration accuracy: ±0.01mm 13. Plate stress value: 300uε below 14.Tool diameter: 0.8-2.3mm 15. Pcb board cutting thickness: 0.2mm-6.0mm 16. Main engine and dust collecting mechanical and electrical pressure: 220v 1φ and 3φ 17. Power consumption: 3.5kva 18. Static elimination gun 19. Vision system: high resolution digital camera 20. Drive motor: AC brushless servo motor 21. Mechanical fetching and releasing arm: anti-static vacuum suction nozzle 22. Feeding mode: rail transportation 23. Discharging mode: belt conveying or vehicle output or rail conveying 24. Load shifting mode: vacuum suction nozzle adsorption load shifting 25. Flow direction: left → right 26. Program backup: usb interface 27. Control mode: special controller 28 Dust collection cabinet size: 640mm×785mm×1760mm(d×w×h) 29. Machine size: 2014mm×1230mm×1650mm(d×w×h) 30. Weight of main engine + dust collector: 1000 kg Two.Introduction to device configuration 1.Double work table structure Adopt double slide rail and cylinder double platform operation. It can cut different types of products at the same time, and greatly reduce the waiting time of taking and putting plates. At the same time, it can change the double platform to a large single platform, increase the working size, and greatly improve the flexibility of equipment. 2. Under the vacuum spindle structure a.YSL-910LAT double spindle on-line milling cutter board spliter adopts high speed imported spindle to cut board, greatly reduce the cutting stress, high precision, small inertia, fast response. b.Milling cutter detection system, real-time monitoring milling cutter state, effectively prevent the phenomenon of continuing to run after cutting. c.A new vision system, uniform ring light source, with brightness adjustment function, make each type of Mark point better recognition, suitable for such as tin plating, copper plating, gold plating, tin spraying, and various types of different color PCB. The whole system is equipped with visual counterpoint compensation function. 3.Under vacuum structure Funnel seal design, suction inlet adopts 45 degrees bevel Angle, reduce dust in the internal vortex phenomenon. 4.CNC special controller The independent CNC special controller integrates the control part, the loop control has strong stability, high precision, fast response transmission and strong anti-interference 5.Collector
MORE>
One. Basic parameter Specifications: 1. Working range of sub-plate: 300mmx350mm 2. XYZ drive mode: ac servo motor 3. Number of movement axes: 7 axes 4. Program teaching mode: color ccd image intuitive teaching input 5. Operation interface: win7 window operation interface 6. Upper vacuum power: 2hp, lower dust collector power: 3hp (option 5hp) 7. Cutting spindle sycotec (Germany) : max80000rpm (automatic tool change) 8. X-Y ac servo speed: 0-1000mm/sec; 9. Z ac servo speed: 0-800mm/sec 10. X-Y repetition accuracy: ±0.01mm 11. Cutting accuracy: ±0.02mm 12. Ccd camera calibration accuracy: ±0.01mm 13. Plate stress value: 300uε below 14. Tool diameter: 0.8-2.3mm 15. Pcb board cutting thickness: 0.2mm-6.0mm 16. Main engine and dust collecting mechanical and electrical pressure: 220v 1φ and 3φ 17. Power consumption: 3.5kva 18. Static elimination gun 19. Vision system: high resolution digital camera 20. Drive motor: AC brushless servo motor 21. Mechanical fetching and releasing arm: anti-static vacuum suction nozzle 22. Feeding mode: rail transportation 23. Discharging mode: belt conveying or vehicle output or rail conveying 24. Load shifting mode: vacuum suction nozzle adsorption load shifting 25. Flow direction: left → right 26. Program backup: usb interface 27. Control mode: special controller 28 Dust collection cabinet size: 640mm×785mm×1760mm(d×w×h) 29. Machine size: 2014mm×1230mm×1650mm(d×w×h) 30. Weight of main engine + dust collector: 1000 kg Two. Introduction to device configuration 1.Claw type plate taking structure The product is clamped to the plate and placed on the processing platform. After the processing is completed, the clamping and placing track of the plate fixture is taken again and flows into the next process. 2.Special product split-plate fixture into the track way 3.Special product split-plate jig track discharge After the product cutting is completed by the online automatic plate splitter, the material clamping claw will take the entire product jig and place the discharging track to transport the next production process. 4.Automatic tool change mode a. Adopt automatic tool change spindle imported from Germany. Save time, realize automation, reduce human factors, high precision, strong stability b. Built-in five groups of milling cutter library, easy to automatically replace the milling cutter, to meet the needs of plate processing. 5.Vacuum suction plate taking structure a. Take and release device: automatic loading and unloading (modular vacuum suction claw, vacuum device, can be independently controlled) b. Transmission structure: X2 axis moves Z2, Z3 axis absorbs, AC servo motor controls. c. Board speed: 0-1000mm/sec (adjustable) 6.Special product jig tray discharging mode Vacuum sucker feeding shaft to cut the product one-time vacuum suction, place the special product fixture to transport the next production process.
MORE>
Basic parameter Specifications: 1. Single side working size: 290mm X 350mm 2. Four-axis servo drive: X, Y1, Y2, Z 3. X-Y AC Servo speed: 0-1000mm/sec 4. Z AC Servo speed: 0-800mm/sec 5.X-Y repetition accuracy: ±0.01mm 6. Cutting accuracy: ±0.02mm 7. CCD camera calibration accuracy: ±0.01mm 8. Plate stress value: 300uε below 9. NSK spindle speed: Max.60,000rpm 10. Tool diameter: 0.8-2.3mm 11. PCB board cutting thickness: 0.2mm-6.0mm 12. Dust collector power: 2HP (upper vacuum) 13. Dust collection cabinet size: 640mm×785mm×1760mm(D×W×H) 14. Machine size: 1075mm×1430mm×1460mm(D×W×H) 15. Weight of main engine + dust collector: 800 KG Two. Describes the device configuration On the dust features: milling cutter board machine is also called curve board machine, using electrostatic brush seal cutting point. Independent for single cut point vacuuming. Greatly improve the effect of vacuuming. The PCB taking and placing area of double Y axis table of milling cutter board splitter is equipped with grating safety facilities to avoid manual misoperation and meet the public safety requirements. Windows OPERATION INTERFACE friendly switching between Chinese AND English, ILLUSTRATED Windows operation interface, editing program is simple, can quickly complete multi-point programs. Software users manage permissions at multiple levels to prevent misoperations. Software sets milling cutter segmentation function, automatic cutting compensation, prolong the service life of milling cutter, reduce the cost.
MORE>
Full Automatic PCB Board Router Machine Widened Technical specifications: 1. Single side working size: 350mm X 450mm 2. Double workbenches in and out at the same time: 700mm X 450mm 3. X-Y AC Servo speed: 0-1000mm/sec 4. Z AC Servo speed: 0-800mm/sec 5. X-Y repetition accuracy: ±0.01mm 6.Cutting accuracy: ±0.02mm 7. CCD camera calibration accuracy: ±0.01mm 8. Plate stress value: 300uε below 9. NSK spindle speed: Max.60,000rpm 10. Tool diameter: 0.8-2.3mm 11. PCB board cutting thickness: 0.2mm-6.0mm 12. Dust collector power: 3HP (option 5HP) 13. Dust collection cabinet size: 640mm×785mm×1760mm(D×W×H) 14. Machine size: 1220mm×1430mm×1520mm(D×W×H) 15. Weight of main engine + dust collector: 900 KG Full Automatic PCB Board Router Machine Widened Describes the device configuration 1. Double work table structure Full automatic PCB board splitter YSL-880L adopts double slide rail and cylinder double platform operation. It can cut different types of products at the same time, and greatly reduce the waiting time of taking and putting plates. At the same time, it can change the double platform to a large single platform, increase the working size, and greatly improve the flexibility of equipment. 2. Lower vacuum spindle structure a. YSL-880L adopts high-speed imported spindle to cut the board, which greatly reduces the cutting stress, high precision, small inertia and quick response. b. Milling cutter detection system, real-time monitoring milling cutter state, effectively prevent the phenomenon of continuing to run after cutting. c. Brand new vision system, uniform ring light source, brightness adjustment function, make different types of Mark point better recognition, suitable for such as tin plating, copper plating, gold plating, tin spraying, and various types of different color PCB. The whole system is equipped with visual counterpoint compensation function. 3. Structure of suction mode Funnel seal design, suction inlet adopts 45 degrees bevel Angle, reduce dust in the internal vortex phenomenon. 4.CNC special controller The independent CNC special controller integrates the control part, the loop control has strong stability, high precision, fast response transmission and strong anti-interference. 5. The dust collection machine YSL-880L Full Automatic PCB Board Router Machine adopts high efficiency motor and wind blade, large suction, built-in polyester needle felt dust bag with large void, good permeability, strong oxidation resistance, noise can be controlled within 80 decibels.
MORE>
550x650mm PCBA Router Machine SMT PCBA Router Machine Large platform YSVC-650-Introduce of SMT PCBA Router Machine High quality PCBA router machine, desktop PCB router, PCB V-cut machine, PCB separator, LED depaneling, for PCBA cutting. 550x650mm PCBA Router Machine SMT PCBA Router Machine Large platform is a high-precision pcba router, which is used in smart phones, smart wear, smart home, tablet computers, automotive electronics, medical devices, aerospace, military and other fields. Features: 1,New CCD system,new vision system can correspond to all kinds of pcb mark.with visual counterpoint correction function. 2,The sensor can monitor the milling cutter state in real time, and effectively prevent the continuous operation of the cutter. 3,Using high speed spindle, cutting stress is greatly reduced, precision is high, inertia is small, and response is fast. 4,Ion air gun will remove static electricity on PCB surface and prevent dust from adsorbing on PCB. 5,Dual platform structure, can deal with different products at the same time, while the dual platform can be combined into a single platform, enhance the flexibility of equipment 6,Adopt CNC special controller,high stability and strong anti-interference. 7,The separated vacuum dust collector adopts high efficiency motor with high suction and low noise. 8, Humanized operation system design, simple operation, flexible . Specifications of SMT PCBA Router Machine Specifications 550x650mm PCBA Router Machine SMT PCBA Router Machine Large platform Model YSVC-650 YSVC-650B YSVC-650A Pcb Size (Double platform, Special size option) 300*350mm 350*450mm 550*650mm PCB thickness 0.3-3.5mm Dimension 1075*1430*1460mm 1125*1530*1460mm 1225*1530*1460mm Weight(with vacuum cleaner) 1000KG Dust Collection Method Vacuum cleaning Air volume of vacuum cleaner 28~35cm3/min Vacuum cleaner Dimension 640*785*1760mm Voltage of the Dust Collector 380V,50/60HZ,3kw Basic parameter Specifications: 1. Single side working size: 290mm X 350mm 3. X-Y AC Servo speed: 0-1000mm/sec 5.X-Y repetition accuracy: ±0.01mm 7. CCD camera calibration accuracy: ±0.01mm 9. NSK spindle speed: Max.60,000rpm 11. PCB board cutting thickness: 0.2mm-6.0mm 13. Dust collection cabinet size: 640mm×785mm×1760mm(D×W×H) 15. Weight of main engine + dust collector: 800 KG On the dust features: milling cutter board machine is also called curve board machine, using electrostatic brush seal cutting point. Independent for single cut point vacuuming. Greatly improve the effect of vacuuming. Windows OPERATION INTERFACE friendly switching between Chinese AND English, ILLUSTRATED Windows operation interface, editing program is simple, can quickly complete multi-point programs. Software sets milling cutter segmentation function, automatic cutting compensation, prolong the service life of milling cutter, reduce the cost.
MORE>
High speed plate distributor YS-4500 With the continuous development of the electronic industry, the production requirements of the substrate, an important component of electronic products, are increasingly Lei higher, to high precision. High density. High performance. Small volume development. In order to meet the requirements of the market, the company's long-term market research on the advantages of various brands in the world, widely listen to the views of all aspects of the user, to make this high-speed dual-mode board machine YS-4500. Software introduction New generation identification system 1: Change the traditional circle, square and other geometric patterns can only be recognized. Can recognize any shape mark point 2: Not only with error correction function, but also accurate data, do not worry about the staff put the wrong board. 3: displacement function, can realize the fixture in the working table arbitrary placement 1: Change the traditional segmentation mode 2: Adjust the depth of the lower cutter according to the thickness of PCB, increase the utilization rate of the milling cutter and save the cost 3: Can be defined according to the needs of the product to determine the condition of the milling cutter Introduction about the construction Taiwan 60000 high-speed spindle is adopted. Using WIN7 system operation interface, the configuration of high pixel color CCD amplification 10 times lens, auxiliary program teaching and editing simulation function, precision is more accurate, the image is clearer. Electric control layout Electronic control - on-line 1: clear, easy maintenance 2: bus mode, simple connection 3: modular design, not high requirements for maintenance personnel Parameters and main accessories of X/Y cutting speed: 0~100mm/s Machine repetition accuracy: ±0.02 Maximum size of the board: 400mm*500mm X,Y,Z control mode: industrial motion controller + industrial computer X,Y,Z drive mode: Panasonic servo electric power Man-machine operation and data storage: industrial computers Cutting accuracy: ±0.1 Spindle speed: Taiwan spindle Max 60000rpm Cutting form: straight line, circle, arc, U shape, L shape, etc Image: Smart Industrial CCD Operation interface: Chinese/English double interface Fidicuial Mark: CCD automatic alignment function Program preview: CCD path simulation function Host voltage: AC 220V 50/60Hz Air pressure: 5.5KG/CM² Host size: 1150 x 1050 x 1580 (L X H X D)mm Main engine weight: 450kg Dust collection mode: next dust collection Dust collector: 2HP Dust collector power supply: AC 380V 50/60Hz Size of dust collector: 650 x 400 x 1250 (L X H X D)mm Dust collector weight: 103kg The main parts of the plate machine Lead screw: Taiwan TBI C5 grinding lead screw Guide rail: Taiwan PMI linear guide rail Spindle: Taiwan spindle Max 60000rpm Servo motor: Panasonic A6 servo motor Industrial control host: industrial computer Monitor: LCD19" CCD: GIGE industrial intelligent CCD Lens: Industrial HD lens Light source: Industrial dimmer +50mmLED ring light source Power Supply: Taiwan Mingwei Relay: Omron relay Introduction to dust collecting machine Clean vacuum mechanism 1: Patented design of brush design, excellent vacuum suburb fruit 2: module suction structure, to ensure long-term dust YS-UA02 high efficiency vacuum cleaner is specially equipped with the lower vacuum separator, super dust removal capacity, the lower vacuum mode with the unique design of the separator can effectively deal with the dust produced in the process of dividing the board, can well protect the cleaning of products and workshop environment and staff health. Motor specification 2HP 380V 50Hz 3-phase Output power 1.5KW Suction air volume 3 m³/min Static pressure -2000mm-AQ Inlet diameter 50mm Outlet diameter 100mm Noise <65dB Net weight 103Kg Dimension 650*400*1250mm Plate splitting machine features: 1: Simple operation, intelligent 2: Good stability 3: simple structure, easy maintenance 4: vacuum suburb fruit good Summary
MORE>
