Ceramic Plate, Aluminum Substrate Wafer Cutting Machine Precision Scribing Machine
1、Equipment use environment requirements and technical parameters
YSL3600Precision scribing machine single axis efficient cutting mode; the maximum processing workpiece size is 150* 150mm, suitable for small packaging substrate materials, soft materials cutting, manual loading and unloading, automatic transmission and positioning, automatic alignment cutting.
1.The scribing machine shall be installed without obvious vibration.Clean the room without corrosive gas and strong magnetic field. Working temperature is between 20 and 25 ℃ and remains constant; relative humidity is <60%, no condensation.
2.The compressed air used by the scribing machine should be clean without oil and water, and the compressed air must be filtered through the cold dryer.
3.The cutting cooling water quality of the cutting machine shall be clean without impurities, and the water temperature shall be within 16-20℃，and the water temperature fluctuation is less than or equal to ± 1℃; the excessive water temperature may cause cutting edge breaking, membrane wear, blade and cutting; the water temperature of the cutting machine shall be within 9-16℃,and the water temperature fluctuation is less than or equal to ± 2℃; the excessive watertemperature may cause tin melting,reverse cutting and brok
en cutting.(The difference from room temperature is within ± 3℃ to avoid excessive condensate)
4.The water quality of the spindle cooling water used in the scribing machine should be clean and free of impurities, the water temperature should be within 12-20℃，and the water temperature fluctuation is less than or equal to ± 1℃. If the water temperature exceeds the standard, it may affect the spindle cooling, affect the accuracy and stability of the spindle, resulting in cutting deviation, poor cutting quality and other conditions.(With room temperature and cutting temperature within±3℃)
5. Gas source oil content is less than 0.5mg / m3.
Basic parameters
Outline Dimension
580mm X 910mm X 1650mm
Weight
About 600kg
Maximum thickness of machable workpiece
4mm(Please communicate with the equipment manufacturer in advance)
Type of processable products
FN、DFN、BGA、LGA、FC、MEMS,LED Light bead BT plate and other materials with the same physical characteristics
Source
single phase AC220V±10%,Maximum power 4.5KVA
Compressed air
Supply compressed air pressure:greater than 0.6MPa,the pressure fluctuation is less than 0.02MPa
Equipment working pressure:0.55-0.6MPa
Consumption peak :200 L/min
Filtering accuracy:0.01 μm/99.5%clean oil-free compressed air
Cooling water
Pressure:0.2-0.3MPa
Consumption peak :2.0 L/min
Temperature :17℃_ ±2℃ (According to the required power adjustment of the processing material,the larger the power,the lower the temperature)
Cut water
Pressure:0.2-0.3MPa
Consumption peak:6.0 L/min
Temperature:10℃-16℃(When the water temperature has special requirements,please contact the equipment manufacturer in advance)
Air exhaust
Total air discharge of equipment:1.5 m³/min
Air speed of equipment air outlet:>17 m/s
0perating temperature of equipment
23℃+2℃
Relative humidity of environment
40%-60%,No condensation
Equipment placement place
Keep away from the vibration source,keep away from the strong wind,dust,water mist,oil mist device.
For SMT Factory Setup, We Can Do for You:
1. We Provide Full SMT Solution for You
2. We Provide Core Technology With Our Equipments
3. We Provide The Most Professional Tech Service
4. We Have Wealthy Experience on SMT Factory Setup
5. We Can Solve Any Question About SMT
KeywordsSMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine.SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine.
YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry.
Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator product.
Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information:
Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email：evaliu@hk-yush.com
Ceramic Plate, Aluminum Substrate Wafer Cutting Machine Precision Scribing Machine 1、Equipment use environment requirements and technical parameters YSL3600Precision scribing machine single axis efficient cutting mode; the maximum processing workpiece size is 150* 150mm, suitable for small packaging substrate materials, soft materials cutting, manual loading and unloading, automatic transmission and positioning, automatic alignment cutting. 1.The scribing machine shall be installed without obvious vibration.Clean the room without corrosive gas and strong magnetic field. Working temperature is between 20 and 25 ℃ and remains constant; relative humidity is <60%, no condensation. 2.The compressed air used by the scribing machine should be clean without oil and water, and the compressed air must be filtered through the cold dryer. 3.The cutting cooling water quality of the cutting machine shall be clean without impurities, and the water temperature shall be within 16-20℃，and the water temperature fluctuation is less than or equal to ± 1℃; the excessive water temperature may cause cutting edge breaking, membrane wear, blade and cutting; the water temperature of the cutting machine shall be within 9-16℃,and the water temperature fluctuation is less than or equal to ± 2℃; the excessive watertemperature may cause tin melting,reverse cutting and brok en cutting.(The difference from room temperature is within ± 3℃ to avoid excessive condensate) 4.The water quality of the spindle cooling water used in the scribing machine should be clean and free of impurities, the water temperature should be within 12-20℃，and the water temperature fluctuation is less than or equal to ± 1℃. If the water temperature exceeds the standard, it may affect the spindle cooling, affect the accuracy and stability of the spindle, resulting in cutting deviation, poor cutting quality and other conditions.(With room temperature and cutting temperature within±3℃) 5. Gas source oil content is less than 0.5mg / m3. Basic parameters Outline Dimension 580mm X 910mm X 1650mm Weight About 600kg Maximum thickness of machable workpiece 4mm(Please communicate with the equipment manufacturer in advance) Type of processable products FN、DFN、BGA、LGA、FC、MEMS,LED Light bead BT plate and other materials with the same physical characteristics Source single phase AC220V±10%,Maximum power 4.5KVA Compressed air Supply compressed air pressure:greater than 0.6MPa,the pressure fluctuation is less than 0.02MPa Equipment working pressure:0.55-0.6MPa Consumption peak :200 L/min Filtering accuracy:0.01 μm/99.5%clean oil-free compressed air Cooling water Pressure:0.2-0.3MPa Consumption peak :2.0 L/min Temperature :17℃_ ±2℃ (According to the required power adjustment of the processing material,the larger the power,the lower the temperature) Cut water Pressure:0.2-0.3MPa Consumption peak:6.0 L/min Temperature:10℃-16℃(When the water temperature has special requirements,please contact the equipment manufacturer in advance) Air exhaust Total air discharge of equipment:1.5 m³/min Air speed of equipment air outlet:>17 m/s 0perating temperature of equipment 23℃+2℃ Relative humidity of environment 40%-60%,No condensation Equipment placement place Keep away from the vibration source,keep away from the strong wind,dust,water mist,oil mist device. For SMT Factory Setup, We Can Do for You: 1. We Provide Full SMT Solution for You 2. We Provide Core Technology With Our Equipments 3. We Provide The Most Professional Tech Service 4. We Have Wealthy Experience on SMT Factory Setup 5. We Can Solve Any Question About SMT KeywordsSMT Stencil Printer, SMT Solder Paste Printer, SMT Printing Machine, SMT PCB Printer, 600mm Solder Paste Printer, , Solder Paste Printer, 1200mm Solder Paste Printer, Semi-auto Solder Paste Printer, SMT Automatic Stencil Printer, PCB Printing Machine.SMT Line, SMT Prodution Line, SMT Assembly Line, SMT Stencil Printer, Solder Paste Printer, Pick and Place Machine, Chip Mounter, SMT Placement, Reflow Oven, SMT Reflow Soldering Oven, PCB Reflow Oven, SMT Loader, PCB Unloader, SMT Conveyor, Wave Soldering Machine, DIP Wave Soldering Equipment, Selective Wave Soldering Machine, PCBA Coating Machine, PCBA Insertion Machine, PCBA Router Machine. YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and processing equipment and an experienced development and manufacture team,half of them have over 10 years experience in electronic equipment industry. Begin with 2004 the company leader invested to develop and manufacture the PCB separator and PCB depaneling machine.From then on we pay more attention to product quality,safe to use and product innovation,so far we have produced many high quality, stable performance, high cost-effective products. Improve production yields, increase productivity, and thus enhance the market competitiveness of our customers. Until now we have design different separating PCB types of PCB separator and PCB depaneling machine with manual,motor-driven,pneumatic-driven,mold punching,milling cutter router.Due to the good quality and reasonable price our customers are all over the world.Up to now YuSH have became one of the biggest PCB separator product. Welcome more people to discuss with us about SMT technologies and solutions, please Contact Us for more information: Tel: +86 13416743702 (WhatsApp/Skype/WeChat), Email：evaliu@hk-yush.com
MORE>
